OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ACASN1002S1002P1AT

P1-P3P4-P6P7-P8
ACAS 0606 AT, ACAS 0612 AT - Precision
www.vishay.com
Vishay Beyschlag
Revision: 12-Apr-13
7
Document Number: 28770
For technical questions, contact: thinfilmarray@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1)
The quoted IEC standards are also released as EN standards with the same number and identical contents.
(2)
Figures are given for arrays with equal values, design type AE.
(3)
For a single element.
Note
• Special temperature coefficent and resistance combinations remain available. For optimized availability please refer to the table
TEMPERATURE COEFFICENT AND RESISTANCE.
4.13 -
Short time overload
(3)
Standard operation mode
U = 2.5 x or
U = 2 x U
max.
;
5 s
± (0.1 % R + 0.01)
no visible damage
4.40 -
Electrostatic discharge
(human body model)
(3)
IEC 61340-3-1;
3 pos. + 3 neg.
(equivalent to MIL-STD-883,
Method 3015); 1000 V
± (0.5 % R + 0.05)
4.19 14 (Na)
Rapid change of
temperature
30 min at - 55 °C and
30 min at 125 °C;
1000 cycles
± (0.25 % R + 0.05)
no visible damage
4.18.2 58 (Td)
Resistance to soldering
heat
Reflow method 2
(IR/forced gas convection);
(260 ± 5) C;
(10 1) s
± (0.1 % R + 0.01 )
no visible damage
4.17.2 58 (Td) Solderability
Solder bath method;
SnPb; non-activated flux
accelerated aging 4 h/155 °C
(215 ± 3) °C; (3 ± 0.3) s
Good tinning ( 95 % covered);
no visible damage
Solder bath method;
SnAgCu; non-activated flux
accelerated aging 4 h/155 °C
(235 ± 3) °C; (2 ± 0.2) s
4.32 21 (Ue
3
) Shear (adhesion) 45 N No visible damage
4.33 21 (Ue
1
) Substrate bending Depth 2 mm, 3 times
± (0.1 % R + 0.01 )
no visible damage;
no open circuit in bent position
4.35 - Flammability
IEC 60695-11-5,
needle flame test; 10 s
No burning after 30 s
4.22 6 (Fc) Vibration
Endurance by sweeping;
10 Hz to 2000 Hz; no resonance;
amplitude 1.5 mm or
200 m/s
2
; 7.5 h
± (0.1 % R + 0.01 )
no visible damage
4.7 - Voltage proof
U
RMS
= U
ins
60 s ± 5 s; against ambient,
between adjacent resistors
No flashover or breakdown
HISTORICAL TEMPERATURE COEFFICIENT AND RESISTANCE RANGES
DESCRIPTION RESISTANCE VALUE
ACCURACY
GRADE
ABSOLUTE TCR TCR TRACKING
ABSOLUTE
TOLERANCE
TOLERANCE
MATCHING
ACAS 0606 AT
ACAS 0612 AT
A ± 25 ppm/K 10 ppm/K ± 0.25 % 0.1 % 47 to 150 k
B ± 25 ppm/K 10 ppm/K ± 0.5 % 0.25 % 47 to 150 k
E ± 25 ppm/K 15 ppm/K ± 0.25 % 0.1 % 47 to 150 k
F ± 25 ppm/K 15 ppm/K ± 0.5 % 0.25 % 47 to 150 k
J ± 25 ppm/K 25 ppm/K ± 0.25 % 0.1 % 47 to 150 k
K ± 25 ppm/K 25 ppm/K ± 0.5 % 0.25 % 47 to 150 k
N ± 50 ppm/K 25 ppm/K ± 0.5 % 0.5 % 47 to 150 k
P ± 50 ppm/K 50 ppm/K ± 0.5 % 0.5 % 47 to 150 k
TEST PROCEDURES AND REQUIREMENTS
EN
60 115-1
CLAUSE
IEC
60 068-2
(1)
TEST
METHOD
TEST PROCEDURE
REQUIREMENTS
PERMISSIBLE CHANGE
(2)
(R)
Stability for product types:
ACAS 0606 AT
ACAS 0612 AT
47 to 150 k
47 to 150 k
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
P1-P3P4-P6P7-P8

ACASN1002S1002P1AT

Mfr. #:
Buy ACASN1002S1002P1AT
Manufacturer:
Vishay
Description:
Resistor Networks & Arrays 10K/10Kohm .1%/.05% 25/15ppm 0606 Auto
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet