PSM-ME-RS232/TTY-P
100275_en_02 PHOENIX CONTACT 3 / 13
Description Ty pe Order No. Pcs./Pkt.
Interface converter, for converting RS-232 (V.24) to TTY,
with electrical isolation, 2 channels, rail-mountable
PSM-ME-RS232/TTY-P 2744458 1
Accessories Ty pe Order No. Pcs./Pkt.
RS-232 cable, 9-pos. D-SUB socket 25-pos on D-SUB
socket
PSM-KA 9 SUB 25/BB/
2METER
2761059 1
RS-232 cable, 9-pos. D-SUB socket on 9-pos. D-SUB
socket, 9-wire, 1:1
PSM-KA9SUB9/BB/2METER 2799474 1
Shield connection clip for printed circuit terminal block ME-SAS 2853899 10
Actuation tool, for ST terminal blocks, also suitable for use
as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
SZF 1-0,6X3,5 1204517 10
D-SUB connector, 9-pos., male connector, one cable
entry < 35°, universal type for all systems, pin assignment:
1, 2, 3, 4, 5, 6, 7, 8, 9 to screw connection terminal block
SUBCON 9/M-SH 2761509 1
Supply
Nominal supply voltage 24 V AC/DC ±20 %
(via pluggable COMBICON screw terminal block)
Typical current consumption 75 mA (24 V DC)
Protective circuit Surge protection (Suppressor diode)
Electrical isolation VCC // V.24 (RS-232) // TTY
Test voltage data interface/power supply 2 kV
rms
(50 Hz, 1 min.)
Torque 0.56 Nm ... 0.79 Nm
V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN 66259-1
Transmission channels 2 (1/1), RxD, TxD, full duplex
Connection method D-SUB9 plug
Conductor cross section 0.2 mm² ... 2.5 mm² (24 AWG ... 13 AWG)
Serial transmission speed ≤ 19.2 kbps
Transmission length 15 m (shielded twisted pair)
Protocols supported transparent protocol
Pin assignment DTE/DCE switchover via switch