Dual Low Offset, Low Power
Operational Amplifier
Data Sheet
OP200
Rev. G Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©1978–2017 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
Low input offset voltage: 75 μV maximum
Low offset voltage drift, over −55°C < T
A
< +125°C
0.5 μV/°C maximum
Low supply current (per amplifier): 725 μA maximum
High open-loop gain: 5000 V/mV minimum
Low input bias current: 2 nA maximum
Low noise voltage density: 11 nV/√Hz at 1 kHz
Stable with large capacitive loads: 10 nF typical
PIN CONNECTIONS
–IN A
1
+IN A
2
NC
3
V–
4
OUT A
16
NC
15
NC
14
V+
13
NC
5
NC
12
+IN B
6
NC
11
–IN B
7
OUT B
10
NC
8
NC
9
NC = NO CONNECT
0
0322-001
Figure 1. 16-Lead SOIC (S-Suffix)
O
UT A
1
–IN A
2
+IN A
3
V–
4
V+
8
OUT B
7
–IN B
6
+IN B
5
OP200
00322-002
A
B
Figure 2. 8-Lead PDIP (P-Suffix)
8-Lead CERDIP (Z-Suffix)
GENERAL DESCRIPTION
The OP200 is the first monolithic dual operational amplifier
to offer OP77 type precision performance. Available in the
industry standard 8-lead pinout, the OP200 combines precision
performance with the space and cost savings offered by a dual
amplifier.
The OP200 features an extremely low input offset voltage of
less than 75 μV with a drift below 0.5 μV/°C, guaranteed over
the full military temperature range. Open-loop gain of the OP200
exceeds 5,000,000 into a 10 kΩ load; input bias current is under
2 nA; CMRR is over 120 dB; and PSRR is below 1.8 μV/V. On-chip
Zener zap trimming is used to achieve the extremely low input
offset voltage of the OP200 and eliminates the need for offset
pulling.
Power consumption of the OP200 is low, with each amplifier
drawing less than 725 μA of supply current. The total current
drawn by the dual OP200 is less than one-half that of a single
OP07, yet the OP200 offers significant improvements over this
industry-standard op amp. The voltage noise density of the OP200,
11 nV/√Hz at 1 kHz, is half that of most competitive devices.
The OP200 is an ideal choice for applications requiring multiple
precision op amps and where low power consumption is critical.
For a quad precision op amp, see the OP400.
OP200* PRODUCT PAGE QUICK LINKS
Last Content Update: 03/28/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
DOCUMENTATION
Application Notes
AN-649: Using the Analog Devices Active Filter Design
Tool
Data Sheet
OP200: Dual Low Offset, Low Power Operational Amplifier
Data Sheet
OP200: Military Data Sheet
TOOLS AND SIMULATIONS
OP200 SPICE Macro Models
DESIGN RESOURCES
OP200 Material Declaration
PCN-PDN Information
Quality And Reliability
Symbols and Footprints
DISCUSSIONS
View all OP200 EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
OP200 Data Sheet
Rev. G | Page 2 of 16
TABLE OF CONTENTS
Features .............................................................................................. 1
Pin Connections ............................................................................... 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Specifications ..................................................................................... 4
Electrical Characteristics ............................................................. 4
Absolute Maximum Ratings ............................................................ 7
Thermal Resistance ...................................................................... 7
ESD Caution .................................................................................. 7
Typical Performance Characteristics ............................................. 8
Applications Information .............................................................. 12
Dual Low Power Instrumentation Amplifier ......................... 12
Precision Absolute Value Amplifier ......................................... 12
Precision Current Pump ............................................................ 12
Dual 12-Bit Voltage Output DAC ............................................ 13
Dual Precision Voltage Reference ............................................ 13
Programmable High Resolution Window Comparator ........ 14
Outline Dimensions ....................................................................... 15
Ordering Guide .......................................................................... 16
REVISION HISTORY
3/2017Rev. F to Rev. G
Changes to Figure 21 ...................................................................... 10
10/2015Rev. E to Rev. F
Changes to General Description .................................................... 1
Changes to Ordering Guide .......................................................... 16
9/2012Rev. D to Rev. E
Changed Table 2 Conditions from V
S
= 15 V to V
S
= ±15 V ...... 4
Updated Outline Dimensions ....................................................... 15
Changes to Ordering Guide .......................................................... 16
2/2009Rev. C to Rev. D
Change to Large Signal Voltage Gain, Table 2 .............................. 4
Changes to Ordering Guide .......................................................... 16
8/2008Rev. B to Rev. C
Updated Format .................................................................. Universal
Changes to Features Section............................................................ 1
Changes to Table 1 and Table 2 ....................................................... 4
Changes to Table 3 and Table 4 ....................................................... 5
Deleted Table 7; Renumbered Sequentially................................... 5
Changes to Figure 15 ......................................................................... 9
Changes to Figure 21 ...................................................................... 10
Changes to Figure 30 and Figure 31 ............................................ 12
Changes to Programmable High Resolution Window
Comparator Section, Figure 33, and Figure 34 .......................... 13
Changes to Figure 35 ...................................................................... 14
Updated Outline Dimensions ....................................................... 15
Changes to Ordering Guide .......................................................... 16
2/2004—Rev. A to Rev. B.
OP200F Deleted .................................................................. Universal
Changes to Ordering Guide ............................................................. 5
Changes to Figure 4 ........................................................................... 8
Updated Outline Dimension ........................................................ 11
4/2002—Rev. 0 to Rev. A.
Edits to Features................................................................................. 1
Edits to General Description ........................................................... 1
Edits to Ordering Information ........................................................ 1
Edits to Pin Connections .................................................................. 1
Edits to Absolute Maximum Ratings .............................................. 2
Edits to Package Type ....................................................................... 2

OP200EZ

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
Precision Amplifiers Low Offset Low Power Mono Dual
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet