REV. A
AD9059
–3–
SPECIFICATIONS
(continued)
AD9059BRS
Parameter Temp Test Level Min Typ Max Unit
DIGITAL INPUTS
Logic 1 Voltage Full VI 2.0 V
Logic 0 Voltage Full VI 0.8 V
Logic 1 Current Full VI ± 1 µA
Logic 0 Current Full VI ± 1 µA
Input Capacitance 25°CV 4.5 pF
Encode Pulsewidth High (t
EH
)25°CIV 6.7 166 ns
Encode Pulsewidth Low (t
EL
)25°CIV 6.7 166 ns
DIGITAL OUTPUTS
Logic 1 Voltage (V
DD
= 3 V) Full VI 2.95 V
Logic 1 Voltage (V
DD
= 5 V) Full IV 4.95 V
Logic 0 Voltage (V
DD
= 3 V or 5 V) Full VI 0.05 V
Output Coding Offset Binary Code
POWER SUPPLY
V
D
Supply Current (V
D
= 5 V) Full VI 72 92 mA
V
DD
Supply Current (V
DD
= 3 V)
4
Full VI 13 15 mA
Power Dissipation
5, 6
Full VI 400 505 mW
Power-Down Dissipation Full VI 6 12 mW
Power Supply Rejection Ratio (PSRR) 25°CI 3 mV/V
NOTES
1
Gain error and gain temperature coefficient are based on the ADC only (with a fixed 2.5 V external reference).
2
t
V
and t
PD
are measured from the 1.5 V level of the ENCODE to the 10%/90% levels of the digital output swing. The digital output load during test is not to exceed
an ac load of 10 pF or a dc current of ± 40 µA.
3
SNR/harmonics based on an analog input voltage of –0.5 dBFS referenced to a 1.0 V full-scale input range.
4
Digital supply current based on V
DD
= 3 V output drive with <10 pF loading under dynamic test conditions.
5
Power dissipation is based on 60 MSPS encode and 10.3 MHz analog input dynamic test conditions (V
D
= 5 V ± 5%, V
DD
= 3 V ± 5%).
6
Typical thermal impedance for the RS style (SSOP) 28-lead package: θ
JC
= 39°C/W, θ
CA
= 70°C/W, and θ
JA
= 109°C/W.
Specifications subject to change without notice.
EXPLANATION OF TEST LEVELS
Test Level
I–100% production tested.
II – 100% production tested at +25°C and sample tested at
specified temperatures.
III – Sample tested only.
IV – Parameter is guaranteed by design and characterization
testing.
V– Parameter is a typical value only.
VI – 100% production tested at +25°C; guaranteed by design
and characterization testing for industrial temperature range.
ABSOLUTE MAXIMUM RATINGS*
V
D
, V
DD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Analog Inputs . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
D
+ 0.5 V
Digital Inputs . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
D
+ 0.5 V
VREF Input . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
D
+ 0.5 V
Digital Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Operating Temperature . . . . . . . . . . . . . . . . . . –55°C to +125°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
*Stresses above those listed under Absolute Maximum Ratings may cause permanent
damage to the device. This is a stress rating only; functional operation of the device
at these or any other conditions above those indicated in the operational sections of
this specification is not implied. Exposure to absolute maximum ratings for extended
periods may affect device reliability.
ORDERING GUIDE
Model Temperature Range Package Option
AD9059BRS –40°C to +85°C RS-28
AD9059/PCB 25°C Evaluation Board
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although the
AD9059 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended
to avoid performance degradation or loss of functionality.
