OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

GP1A173LCSVF

P1-P3P4-P6P7-P9P10-P10
GP1A173LCSVF
7
Sheet No.: OP13032EN
■Recommended Installation Hole drawing Scale : 2/1 Unit : 1/1mm
(Drawing No. CY15075i06)
*1 We recommend to fix GP1A173LCSVF at punching side on the fixing plate (metal plate).
*2 Please decide the final dimensions at your side after confirmation by the actual
applications, Because mounting efficiency and mounted stabilization are dependent
on mounting plate corner-R and punched state.
*3 Tolerance shall be ±0.1mm
*4 Please don’t hold connector area but sensor area when fitting in or putting out on the metal plate.
Normal mounting type
Thickness of plate for 1.6mm Thickness of plate for 1.2mm Thickness of plate for 1.0mm
Irregular mounting protection type
Thickness of plate for 1.6mm Thickness of plate for 1.2mm Thickness of plate for 1.0mm
GP1A173LCSVF
8
Sheet No.: OP13032EN
■Parts
This product uses the below parts.
● Light detector (Quantity : 1)
(Using a silicon photodiode as light detecting portion, and a bipolar IC as signal processing circuit.)
Type
Maximum sensitivity
wavelength (nm)
Sensitivity
wavelength (nm)
Response time
(μs)
Photodiode
900
400 to 1200
10
● Light emitter (Quantity : 1)
Type
Material
Maximum light emitting
wavelength (nm)
I/O Frequency
(MHz)
Infrared light
emitting diode
(non-coherent)
GaAs
950
0.3
● Material
Case
Lead flame
Black polycarbonate resin
(UL 94V-0)
Copper Alloy
(With plating)
● Others
This product shall not be radiation flux proof.
The laser oscillator is not equipped on this product.
The terminals are covered with Tin Plating (more than 99.99%).
GP1A173LCSVF
9
Sheet No.: OP13032EN
■Packing specification
● Package
No.
Name
Material
Quantity
1
Packing case
Corrugated cardboard
1/1000
2
Pad
Corrugated cardboard
6/1000
3
Tray
Polystyrene
1/200
4
Kraft tape
-
-
● Packing method
1) 5 products are put in 1 pocket.
The longer direction of the product is arranged in the arbitrary direction.
200 products are put in the tray. <Fig.1>
2) The pads are attached at the top and the bottom of the trays and also inserted between the trays. <Fig.2>
3) Seal packing case with Kraft tape. <Fig.3>
4) Indication items
The contents of the carton indication conforms to EIAJ C-3 and the following items are indicated.
Model No., Internal production control name, Quantity, Packing date, Corporate name,
Country of origin <Fig.3>
(1000pcs. / packing case)
(Approximately 2.26kg / packing mass)
P1-P3P4-P6P7-P9P10-P10

GP1A173LCSVF

Mfr. #:
Buy GP1A173LCSVF
Manufacturer:
Sharp Microelectronics
Description:
SENSOR OPTICAL 5MM MODULE SLOT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet