OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MGA-633P8-BLKG

P1-P3P4-P6P7-P9P10-P12P13-P14
10
MGA-633P8 Typical Scattering Parameters, Vdd = 5V, Idd = 54mA
Freq
GHz
S
11
S
21
S
12
S
22
Mag. Ang. dB Mag. Ang. Mag. Ang. Mag. Ang.
0.1 0.73 -45.42 28.96 28.06 145.48 0.02 62.09 0.27 -43.62
0.5 0.25 -95.49 22.03 12.64 108.20 0.05 59.34 0.10 -4.56
0.9 0.16 -119.26 18.08 8.02 89.72 0.08 60.53 0.14 -16.96
1.0 0.15 -124.97 17.27 7.30 86.35 0.09 60.46 0.15 -18.82
1.5 0.10 -142.55 14.10 5.07 70.97 0.12 56.12 0.19 -39.65
1.9 0.07 -158.30 12.17 4.06 60.60 0.15 51.25 0.19 -56.21
2.0 0.07 -162.64 11.74 3.86 58.17 0.16 49.92 0.19 -60.31
2.5 0.05 177.70 9.88 3.12 46.59 0.20 43.20 0.21 -79.41
3.0 0.03 162.14 8.36 2.62 35.95 0.23 36.08 0.23 -95.09
4.0 0.01 -41.60 6.00 2.00 16.45 0.30 22.04 0.25 -118.55
5.0 0.03 -64.06 4.27 1.64 -1.63 0.36 7.61 0.25 -144.60
6.0 0.04 -129.24 2.96 1.41 -18.89 0.42 -7.19 0.24 -170.64
7.0 0.07 -152.03 1.85 1.24 -35.43 0.47 -22.36 0.26 165.84
8.0 0.12 -154.39 0.87 1.11 -50.92 0.52 -37.15 0.29 150.25
9.0 0.18 -161.44 0.05 1.01 -65.12 0.56 -51.58 0.33 138.58
10.0 0.21 -177.23 -0.57 0.94 -78.96 0.60 -66.28 0.35 124.74
11.0 0.21 156.03 -1.03 0.89 -93.28 0.63 -81.96 0.33 104.27
12.0 0.22 124.49 -1.53 0.84 -108.35 0.66 -98.72 0.33 78.81
13.0 0.26 104.45 -2.13 0.78 -122.84 0.66 -115.13 0.38 62.57
14.0 0.33 95.24 -2.66 0.74 -135.50 0.66 -129.75 0.42 60.19
15.0 0.39 84.99 -2.96 0.71 -146.69 0.66 -143.01 0.43 60.20
16.0 0.42 67.14 -3.10 0.70 -159.52 0.67 -157.83 0.40 50.25
17.0 0.43 44.98 -3.53 0.67 -175.16 0.66 -175.42 0.40 27.20
18.0 0.49 28.99 -4.50 0.60 169.61 0.60 167.43 0.48 10.68
19.0 0.57 17.18 -5.59 0.53 156.86 0.53 152.94 0.56 7.82
20.0 0.62 5.97 -6.14 0.49 145.85 0.50 140.18 0.60 6.77
Figure 34
RFinput
Reference Plane
RFoutput
Reference Plane
Bias
[1]
[2]
[3]
[4]
[8]
[7]
[6]
[5]
11
Part Number Ordering Information
Part Number No. of Devices Container
MGA-633P8-BLKG 100 Antistatic Bag
MGA-633P8-TR1G 3000 7 inch Reel
SLP2X2 Package
Typical Noise Parameters, Vdd = 5V, Idd = 54mA
Freq
GHz
Fmin
dB
Γ
opt
Mag.
Γ
opt
Ang. R
n/50
0.5 0.46 0.169 -37 0.051
0.7 0.38 0.15 -17 0.0586
0.75 0.36 0.144 -15 0.0532
0.8 0.35 0.136 -13 0.0478
0.9 0.33 0.129 -7 0.0446
1.7 0.46 0.048 80.5 0.0644
1.9 0.51 0.028 98.7 0.0498
Notes:
1. The Fmin values are based on noise gure measurements at 100
dierent impedances using Focus source pull test system. From
these measurements a true Fmin is calculated.
2. Scattering and noise parameters are measured on coplanar waveguide
made on 0.010 inch thick ROGER 4350. The input reference plane is
at the end of the RFinput pin and the output reference plane is at the
end of the RFoutput pin as shown in Figure 30.
3. S2P le with scattering and noise parameters for biasing 3V 54mA,
3.5V 54mA, 4V 54mA, 4.5V 54mA, 5V 40mA, 5V 54mA and 5V 70mA
are available upon request.
PIN 1 DOT
BY MARKING
2.00±0.050
2.00±0.050
33X
0.203 Ref.
0.000–0.05
0.75±0.05
0.60±0.050
Exp. DAP
0.35±0.050
0.25±0.050
1.20±0.050
Exp. DAP
1.50
Ref.
0.50 Bsc
PIN #1 IDENTIFICATION
R0.100
Notes:
1. All dimensions are in millimeters.
2. Dimensions are inclusive of plating.
3. Dimensions are exclusive of mold ash and metal burr.
Top View
Bottom View
Side View
12
Recommended PCB Land Pattern and Stencil Design
0.50
R0.15
0.17
0.50
1.500.21
1.75
0.56
Metal surface
Soldermask Open
0.50
0.25
R0.15
0.45
0.30
0.50
1.20
1.50
0.50
0.05
(all SM gaps)
2.20
1.75
0.00
0.80
0.50
0.22
0.40
0.170
0.48
0.21
1.50
1.72
2.16
1.75
0.56
Note:
1. Recommended Land Pattern and Stencil Opening
2. Stencil thickness is 0.1mm (4 mils)
3. All dimension are in mm unless otherwise specied
Land Pattern
Stencil Opening
Combination of Land Pattern and Stencil Opening
P1-P3P4-P6P7-P9P10-P12P13-P14

MGA-633P8-BLKG

Mfr. #:
Buy MGA-633P8-BLKG
Manufacturer:
Broadcom / Avago
Description:
IC RF AMP CDMA 450MHZ-2GHZ 8QFN
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet