AAL Sensors
- 18 -
www.nve.com phone: 952-829-9217 fax: 952-829-9189
AAL Sensors
Features:
Excellent Sensitivity to Applied Magnetic Fields
Wheatstone Bridge Analog Output
Temperature Tolerance to 150°C Continuous
Very Low Magnetic Hysteresis
Near-Zero Voltage Operation
DC to >1MHz Frequency Response
Small, Low-Profile Surface Mount Packages
Applications:
General Motion, Speed, and Position Sensing
Low Voltage, High Temperature Applications
Low Field Sensing for Magnetic Media Detection
Current Sensing
Description:
The AAL-Series GMR sensors are manufactured with a low hysteresis GMR material, for use in
magnetometer applications where minimum hysteresis is important. They are also extremely
temperature tolerant, to +150°C operating temperatures.
Magnetic Characteristics:
Part
Number
Saturation
Field (Oe
1
)
Linear
Range
(|Oe
1
|)
Sensitivity
(mV/V-Oe
1
)
Resistance
(Ohms)
Package
2
Die Size
3
(µm)
Min Max Min Max
AAL002-02 15 1.5 10.5 3.0 4.2 5.5K ±20% SOIC8 436x3370
GMR
pin 5, OUT+
Functional Block Diagram
shield
shield
pin 1, OUT-
pin 4, V-
(ground)
pin 8,
V+(supply)
Orientation
chamfer
OUT - V- (ground)
OUT+V+ (supply)
Pin-out
NVE
AAxxx
-02
Axis of Sensitivity
NVE
AAXXX-02
Pin 1
AAL Sensors
- 19 -
www.nve.com phone: 952-829-9217 fax: 952-829-9189
General Characteristics:
Parameter Min Typical Max Unit
Input Voltage Range <1
4
±25
4
Volts
Operating Frequency DC >1 MHz
Operating Temperature Range -50 150
°C
Bridge Electrical Offset -4 +4 mV/V
Signal Output at Max. Field 45 mV/V
Nonlinearity 2 % (unipolar)
5
Hysteresis 4 % (unipolar)
5
TCR +0.11
% / °C
6
TCOI -0.28
% / °C
6
TCOV -0.40
% / °C
6
Off Axis Characteristic
Cos β
7
ESD Tolerance 400 V pin-to-pin HBM
Notes:
1. 1 Oersted (Oe) = 1 Gauss in air.
2. See the Appendix for package dimensions and tolerances.
3. Sensors can be provided in die form by special request.
4. GMR AAL-Series sensors are pure ratiometric devices meaning that they will operate properly at extremely low supply
voltages
. The output signal will be proportional to the supply voltage. Maximum voltage range is limited by the power
dissipation in the package and the maximum operating temperature of the sensor.
5. Unipolar operation means exposure to magnetic fields of one polarity, e.g. 0 to 30 Gauss, or -2 to -50 Gauss, but not -20 to
+30 Gauss (bipolar operation)
. Bipolar operation will increase nonlinearity and hysteresis.
6. TCR is resistance change with temperature with no applied field
. TCOI is the output change with temperature using a
constant current source to power the sensor
. TCOV is the output change with temperature using a constant voltage source
to power the sensor.
7. Beta (β) is any deviation angle from the sensitive axis.
AAL002 Temperature Performance,
1mA Current Supply
-0.05
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
-30 -20 -10 0 10 20 30
Applied Magnetic Field (Oe)
Output Voltage (V)
-40C
25C
85C
125C
AAL002 Temperature Performance, 5V Supply
-0.05
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
-30 -20 -100102030
Applied Magne tic Field (Oe)
Output Voltage (V)
-40C
25 C
85 C
125C
AAV Sensors
- 20 -
www.nve.com phone: 952-829-9217 fax: 952-829-9189
AAV Sensors
Features:
Operates in Magnetic Saturation, 30 to 200 Gauss
Half-Bridge or Individual Resistor Configurations
Sine and Cosine Outputs Available
Utilizes Spin Valve GMR Material
Precise Detection of Magnetic Field
Ultra-Small PLLP Package
Cannot Be Damaged by Large External Magnetic Fields
Description:
The AAV001-11 and AAV002-11 are arrays of four GMR resistors rotated at 90-degree intervals in
the package. The AAV001-11 features independent resistors that can be wired together to form two
half-bridges, or used as independent resistors. The AAV002-11 has the bridge connections made
internally to the package. For either part, the output can be configured to represent the sine and cosine
function of the magnetic field being applied to the sensor. Each resistor is 1.5 k nominal resistance
and output of each half-bridge is ratiometric with the power supply voltage. The part features NVE’s
PLLP6 housing, which is a 3.0 mm x 3.0 mm x 0.9 mm thick surface mount package.
Operation:
The sensor elements contain two magnetic layers: a pinned, or fixed-direction layer, and a movable or
free layer. The diagram below illustrates the configuration with arrows representing the two layers:
Pinned Layer
Free Layer
Angle Between Pinned
and Free Layers
Determines Electrical
Resistance of Sensor
Applied Magnetic Field
(30 to 200 Gauss)
Free Layer Aligns
with the Applied
Magnetic Field

AB001-02E

Mfr. #:
Manufacturer:
Description:
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union