G70D
G70D
4
3
CHARACTERISTICS
Part number
G70D-VSOC16/
G70D-SOC16 (-1)
G70D-SOC16(-1) G70D-VFOM16/
G70D-FOM16 (-1)
G70D-FOM16 (-1)
Output type
Relay outputs Power MOSFET Relay outputs
Contact form
16 points (SPST-NO x 16)
Contact mechanism
Single
Contact resistance
100 m
Ω
max. measured at 1 A, 5 VDC
Insulation method
Photocoupler
Must operate time
10 ms max. at 23
°
C (73.4
°
F) ambient
temperature
6msmax.
Release time
10 ms max. at 23
°
C (73.4
°
F) ambient
temperature
10 ms max.
Output ON-resistance
2.4
Ω
max.
Leakage current at OFF-state
10
µ
A max. at 125 VDC
Max. switching frequency
Mechanical: 18,000 operations/hr
Rated load: 1,800 operations/hr
Insulation resistance
100 M
Ω
min. (at 500 VDC)
Dielectric strength
2,000 VAC for 1 min between coil and contact 2,000 VAC for 1 min between input and output
terminals
Noise immunity
Power input (normal mode): 600 V for 10 min with a pulse width of 100 ns/1
µ
s
Power input (common mode): 1.5 kV for 10 min with a pulse width of 100 ns/1
µ
s
Input cable (coiling): 1.5 kV for 10 min with a pulse width of 100 ns/1
µ
s
Unit body (coiling): 600 V for 10 min with a pulse width of 100 ns/1
µ
s
Vibration resistance
Destruction
10 to 55 Hz, 1.0--mm double amplitude for 2 hrs each in X, Y, and Z directions
Malfunction
10 to 55 Hz, 0.75--mm double amplitude for 2 hrs each in X, Y, and Z directions
Shock resistance
Destruction
300 m/s
2
Malfunction
100 m/s
2
Operating voltage range
24 VDC
+10%
/
--15%
Current consumption
Approx. 170 mA at 24
VDC (See Note 2)
Approx 300 mA at 24
VDC (See Note 2)
Approx. 125 mA at 24
VDC (See Note 3)
Approx. 300 mA at 24
VDC (See Note 3)
Cable length
Between block and controller: 5 m max. (reference value for AWG28)
Between block and external device: Dependent on load
LED color
Operation indicator:
orange
Operation indicator:
orange
Power supply: green
Operation indicator:
orange
Operation indicator:
orange
Power supply: green
Coil surge absorber
Diode (600 V, 1 A) Diode (400 V, 0.3 A) Diode (600 V, 1 A) Diode (400 V, 0.3 A)
Ambient
temperature
Operating
-- 2 5
°
Cto55
°
C(--13
°
F
to 131
°
F) with no
icing or condensation
0
°
Cto55
°
C(32
°
Fto
131
°
F) with no icing
or condensation
-- 2 5
°
Cto55
°
C(--13
°
F
to 131
°
F) with no
icing or condensation
0
°
Cto55
°
C(32
°
Fto
131
°
F) with no icing
or condensation
Storage
-- 2 5
°
Cto65
°
C(--13
°
F
to 149
°
F) with no
icing or condensation
-- 2 0
°
Cto65
°
C(--4
°
F
to 149
°
F) with no
icing or condensation
-- 2 5
°
Cto65
°
C(--13
°
F
to 149
°
F) with no
icing or condensation
-- 2 0
°
Cto65
°
C(--4
°
F
to 149
°
F) with no
icing or condensation
Ambient humidity Operating
45% to 85% RH 35% to 85% RH 45% to 85% RH 35% to 85% RH
Mounting strength
No damage when 49 N pull load was applied for 1 s in all directions (except for 9.8 N min. in
direction of rail)
Terminal strength
Tightening torque: 0.78 to 1.18 N
:
m
Pull strength: 49 N for 1 min
Weight
(See Note 4)
Approx. 280 g Approx. 200 g Approx. 280 g Approx. 200 g
Note: 1. The above values are initial values.
2. Current consumption is when all points are ON and includes G6D Relay coil current but does not include any external load
current.
3. Current consumption is when all points are ON and includes G3DZ input current but does not include any external load current.
4. The Relay Output Block weighs approximately 315 g with the Expansion Terminal Block mounted.