OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MF1PH2131DA4/01J

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27
NXP Semiconductors
MF1P(H)x1y1
MIFARE Plus EV1
MF1P(H)x1y1 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2018. All rights reserved.
Product short data sheet Rev. 3.0 — 23 July 2018
COMPANY PUBLIC 366930 16 / 27
Command Description
ReadPlainNoMAC_UnMACed reading in plain, no MAC on response,
no MAC on command
VCSupportLastISOL3 check if the Virtual Card Concept is supported,
communicate PCD capabilities and retrieve the UID
Authentication commands available after ISO/IEC 14443-4 activation
[1]
GetVersion returns manufacturing related data of the PICC
Read_Sig Retrieve the ECC originality check signature.
AuthenticateFirst (part 1) first authenticate
AuthenticateNonFirst (part 1) following authenticate
AuthenticateSectorSwitch (part 1) used to switch single sectors to SL3
AuthenticateContinue (part 2) second authentication step
ResetAuth reset the authentication
Memory commands available after ISO/IEC 14443-4 activation
[2]
WriteEncryptedNoMAC writing encrypted, no MAC on response,
MAC on command
WriteEncryptedMAC writing encrypted, MAC on response,
MAC on command
Proximity check commands available after ISO/IEC 14443-4 activation
PreparePC prepare for the Proximity Check
ProximityCheck perform the precise measurement for the proximity check
VerifyPC verify the proximity check
VC commands available after ISO/IEC 14443-4 activation, using ISO/IEC 7816-4 protocol
ISOSelect Select virtual card
ISOExternalAuthenticate Authenticate PD
[1] For security level switch, the originality function, sector security level switch and updating of AES keys and
VCSystemData blocks
[2] For updating of AES keys and VCSystemData blocks
In addition to the commands listed in Table 7, all commands defined for SL3
communication are available for those sectors which have been switch to SL3 or
SL1SL3Mix mode using the AuthenticateSectorSwitch feature.
9.5 SL3 command overview
Table 8. SL3 command overview
Command Description
MIFARE Plus commands
GetVersion returns manufacturing related data of the PICC
Read_Sig Retrieve the ECC originality check signature.
AuthenticateFirst (part 1) first authenticate
AuthenticateNonFirst (part 1) following Authenticate
NXP Semiconductors
MF1P(H)x1y1
MIFARE Plus EV1
MF1P(H)x1y1 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2018. All rights reserved.
Product short data sheet Rev. 3.0 — 23 July 2018
COMPANY PUBLIC 366930 17 / 27
Command Description
AuthenticateContinue (part 2) second authentication step
ResetAuth reset the authentication
Additional Frame proceed to next response frame in GetVersion
READ commands
ReadEncryptedNoMAC_MACed reading encrypted, no MAC on response,
MAC on command
ReadEncryptedMAC_MACed reading encrypted, MAC on response,
MAC on command
ReadPlainNoMAC_MACed reading in plain, no MAC on response,
MAC on command
ReadPlainMAC_MACed reading in plain, MAC on response,
MAC on command
ReadEncryptedNoMAC_UnMACed reading encrypted, no MAC on response,
no MAC on command
ReadEncryptedMAC_UnMACed reading encrypted, MAC on response,
no MAC on command
ReadPlainNoMAC_UnMACed reading in plain, no MAC on response,
no MAC on command
ReadPlainMAC_UnMACed reading in plain, MAC on response,
no MAC on command
WRITE commands
WriteEncryptedNoMAC writing encrypted, no MAC on response,
MAC on command
WriteEncryptedMAC writing encrypted, MAC on response,
MAC on command
WritePlainNoMAC writing in plain, no MAC on response,
MAC on command
WritePlainMAC writing in plain, MAC on response,
MAC on command
VALUE operations
IncrementNoMAC incrementing a value encrypted,
no MAC on response, MAC on command
IncrementMAC incrementing a value encrypted,
MAC on response, MAC on command
DecrementNoMAC decrementing a value encrypted,
no MAC on response, MAC on command
DecrementMAC decrementing a value encrypted,
MAC on response, MAC on command
TransferNoMAC transferring a value, no MAC on response, MAC
on command
NXP Semiconductors
MF1P(H)x1y1
MIFARE Plus EV1
MF1P(H)x1y1 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2018. All rights reserved.
Product short data sheet Rev. 3.0 — 23 July 2018
COMPANY PUBLIC 366930 18 / 27
Command Description
TransferMAC transferring a value, MAC on response,
MAC on command
IncrementTransferNoMAC combined incrementing and transferring a value
encrypted, no MAC on response,
MAC on command
IncrementTransferMAC combined incrementing and transferring a value
encrypted, MAC on response,
MAC on command
DecrementTransferNoMAC combined decrementing and transferring a value
encrypted, no MAC on response,
MAC on command
DecrementTransferMAC combined decrementing and transferring a value
encrypted, MAC on response,
MAC on command
RestoreNoMAC restoring a value, no MAC on response,
MAC on command
RestoreMAC restoring a value, MAC on response,
MAC on command
Proximity check commands
PreparePC prepare for the Proximity Check
ProximityCheck perform the precise measurement for the
proximity check
VerifyPC verify the proximity check
VC commands using ISO/IEC 7816-4 protocol
ISOSelect Select virtual card
ISOExternalAuthenticate Authenticate PD
Transaction MAC commands
CommitReaderID commit reader ID for Transaction MAC
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27

MF1PH2131DA4/01J

Mfr. #:
Buy MF1PH2131DA4/01J
Manufacturer:
NXP Semiconductors
Description:
RFID Transponders MIFARE Plus EV1
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet