Table 14: Identify Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
79 – – – Serial ATA features are enabled
15–8 – 00000000b Reserved for Serial ATA
7 V 0b 1 = Automatic partial to slumber transitions are enabled
6 V 1b 1 = Software settings preservation is enabled
5 V 0b 1 = Hardware feature control is enabled
4 V 0b 1 = In-order data delivery is enabled
3 V 0b 1 = Device-initiated interface power management is enabled
2 V 0b 1 = DMA setup auto-activate optimization is enabled
1 V 0b 1 = Non-zero buffer offsets in DMA setup FIS is enabled
0 V 0b Reserved (set to 0)
80 – – – Major revision number
15–12 F 0000b Reserved
11 F 0b 1 = ATA8-ACS4 is supported
10 F 1b 1 = ATA8-ACS3 is supported
9 F 1b 1 = ATA8-ACS2 is supported
8 F 1b 1 = ATA8-ACS is supported
7 F 1b 1 = ATA/ATAPI-7 is supported
6 F 1b 1 = ATA/ATAPI-6 is supported
5 F 1b 1 = ATA/ATAPI-5 is supported
4–1 X 1100b Obsolete
0 – 0b Reserved
81 – F 006Dh Minor revision number
82 – – – Command and feature sets are supported
15 X 0b Obsolete
14 F 1b 1 = NOP command is supported
13 F 1b 1 = READ BUFFER command is supported
12 F 1b 1 = WRITE BUFFER command is supported
11–10 X 00b Obsolete
9 F 0b 1 = DEVICE RESET command is supported
8–7 X 00b Obsolete
6 F 1b 1 = Read look-ahead is supported
5 F 1b 1 = Write cache is supported
4 F 0b Shall be cleared to zero to indicate that the packet feature set
is not supported
3 F 1b 1 = Mandatory power management feature set is supported
2 X 0b Obsolete
1 F 1b 1 = Security feature set is supported
0 F 1b 1 = SMART feature set is supported
5100 Series NAND Flash SSD
Device ID
CCMTD-1725822587-10309
5100_series_SSD_disti.pdf - Rev. C 08/17 EN
16
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.