Table 14: Identify Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
49 – – – Capabilities
15–14 F 00b Reserved for the IDENTIFY PACKET DEVICE command
13 F 1b 1 = Standby timer values as specified in this standard are sup-
ported
0 = Standby timer values shall be managed by the device
12 F 0b Reserved for the IDENTIFY PACKET DEVICE command
11 F 1b 1 = IORDY is supported
0 = IORDY may be supported
10 F 1b 1 = IORDY may be disabled
9 F 1b 1 = LBA is supported
8 F 1b 1 = DMA is supported
7–2 F 000000b Reserved
1–0 V 00b Long physical sector alignment error reporting
50 – – – Capabilities
15 F 0b Shall be cleared to zero
14 F 1b Shall be set to one
13–2 F 000000000000b Reserved
1 X 0b Obsolete
0 F 1b Shall be set to one to indicate a vendor-specific standby timer
value minimum
51–52 – X 0000h 0000h Obsolete
53 15–8 V 00h Free-fall control sensitivity: 00h = Vendor's recommended set-
ting
01h–FFh = Sensitivity level
7–3 F 00000b Reserved
2 F 1b 1 = The fields reported in word 88 are valid
0 = The fields reported in word 88 are not valid
1 F 1b 1 = The fields reported in words (70:64) are valid
0 = the fields reported in words (70:64) are not valid
0 X 0b Obsolete
54–58 – X 3FFFh 0010h
003Fh FC10h
00FBh
Obsolete
5100 Series NAND Flash SSD
Device ID
CCMTD-1725822587-10309
5100_series_SSD_disti.pdf - Rev. C 08/17 EN
12
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.
