M.2 2280
Product mass: less than 10 grams
Physical dimensions conform to the applicable form factor specifications as listed in
the figure below.
Figure 6: M.2 Type 2280 Package
Pin 1
Pin 75
L ±0.15
W ±0.15
B ±0.08
A MAX
C MAX
(3.50 DIA)
(5.50 DIA)
Note:
1. All dimensions are in millimeters.
Table 21: M.2 Type 2280 Package Dimensions
Capacity (GB) Specification W L A B C Unit
240 D5 22.00 80.00 1.50 0.80 1.50 mm
480
960
1920
Note:
1. Dimension values in millimeter per PCI Express M.2 Specification Rev. 1.0.
5100 Series NAND Flash SSD
Physical Configuration
CCMTD-1725822587-10309
5100_series_SSD_disti.pdf - Rev. C 08/17 EN
31
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.
Compliance
Micron SSDs comply with the following:
Micron Green Standard
Built with sulfur resistant resistors
CE (Europe): EN 55032 Class B, RoHS
FCC: CFR Title 47, Part 15 Class B
UL/cUL: approval to UL-60950-1, 2nd Edition, IEC 60950-1:2005 (2nd Edition); EN
60950-1 (2006) + A11:2009+ A1:2010 + A12:2011 + A2:2013
BSMI (Taiwan): approval to CNS 13438 Class B and CNS 15663
RCM (Australia, New Zealand): AS/NZS CISPR32 Class B
KC RRL (Korea): approval to KN32 Class B, KN 35 Class B
W.E.E.E.: compliance with EU WEEE directive 2012/19/EC. Additional obligations
may apply to customers who place these products in the markets where WEEE is en-
forced.
TUV (Germany): approval to IEC60950/EN60950
VCCI (Japan): 2015-04 Class B
IC (Canada): ICES-003 Class B
- This Class B digital apparatus complies with Canadian ICES-003.
- Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FCC Rules
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur in a partic-
ular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following meas-
ures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the re-
ceiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
5100 Series NAND Flash SSD
Compliance
CCMTD-1725822587-10309
5100_series_SSD_disti.pdf - Rev. C 08/17 EN
32
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.
References
Serial ATA: High-speed serialized AT attachment, Serial ATA working group, available
at www.sata-io.org
SATA 3.2 GOLD
ATA-8 ACS-3 Revision 5
SFF-8201 Rev. 3.3: For 2.5-Inch mechanical
Trusted Computing Group (TCG) Enterprise Specification Version 1.00 Revision Final,
Revision 3.00 January 10, 2011. Available at www.trustedcomputinggroup.org
PCI Express M.2 Specification rev 1.0: For M.2 mechanical.
Trade Agreements Act of 1979 (19 U.S.C. 2501)
5100 Series NAND Flash SSD
References
CCMTD-1725822587-10309
5100_series_SSD_disti.pdf - Rev. C 08/17 EN
33
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.

MTFDDAV480TBY-1AR1ZABYY

Mfr. #:
Manufacturer:
Micron
Description:
Solid State Drives - SSD 5100 480GB M.2 SSD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union