OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MF0MOU2001DA4,118

P1-P3P4-P6P7-P9P10-P12P13-P15
1. General description
NXP Semiconductors has developed MIFARE MF0ICU2 - MIFARE Ultralight C - to be
used with Proximity Coupling Devices (PCD) according to ISO/IEC 14443A (see Ref. 1
“ISO/IEC”). The communication layer (MIFARE RF Interface) complies to parts 2 and 3 of
the ISO/IEC 14443A standard. The MF0ICU2 is primarily designed for limited use
applications such as public transportation, event ticketing and NFC Forum Tag Type 2
applications.
1.1 Contactless energy and data transfer
In the MIFARE system, the MF0ICU2 is connected to a coil with a few turns. The
MF0ICU2 fits for the TFC.0 (Edmonson) and TFC.1 ticket formats as defined in EN 753-2.
TFC.1 ticket formats are supported by the MF0xxU20 chip featuring an on-chip resonance
capacitor of 16.9 pF.
The smaller TFC.0 tickets are supported by the MFxxU21 chip holding an on-chip
resonance capacitor of 50 pF.
When the ticket is positioned in the proximity of the coupling device (PCD) antenna, the
high speed RF communication interface allows the transmission of the data with a baud
rate of 106 kbit/s.
1.2 Anticollision
An intelligent anticollision function according to ISO/IEC 14443 allows to operate more
than one card in the field simultaneously. The anticollision algorithm selects each card
individually and ensures that the execution of a transaction with a selected card is
performed correctly without data corruption resulting from other cards in the field.
MF0ICU2
MIFARE Ultralight C
Rev. 3.2 — 19 May 2009
171432
Product short data sheet
PUBLIC
Fig 1. MIFARE card reader
001aah998
coil:
20 mm
coil: 56 mm
TFC.0
energy
directly mounted IC
data
MIFARE CARD
PCD
MF0ICU2_SDS_32 © NXP B.V. 2009. All rights reserved.
Product short data sheet
PUBLIC
Rev. 3 — 19 May 2009
171432 2 of 15
NXP Semiconductors
MF0ICU2
MIFARE Ultralight C
1.2.1 Cascaded UID
The anticollision function is based on an IC individual serial number called Unique
IDentification. The UID of the MF0ICU2 is 7 bytes long and supports cascade level 2
according to ISO/IEC 14443-3.
1.3 Security
•
3DES Authentication
• Anti-cloning support by unique 7-byte serial number for each device
• 32-bit user programmable OTP area
• Field programmable read-only locking function per page for first 512-bit
• Read-only locking per block for rest of memory
2. Features
2.1 MIFARE‚ RF interface (ISO/IEC 14443 A)
n Contactless transmission of data and supply energy (no battery needed)
n Operating distance: up to 100 mm (depending on field strength and antenna
geometry)
n Operating frequency: 13.56 MHz
n Fast data transfer: 106 kbit/s
n High data integrity: 16-bit CRC, parity, bit coding, bit counting
n True anticollision
n 7-byte serial number (cascade level 2 according to ISO/IEC 14443-3)
n Typical ticketing transaction: < 35 ms
n Fast counter transaction: < 10 ms
2.2 EEPROM
n 1536-bit total memory
n 1184-bit user memory
n 36 pages user r/w area
n 512-bit compatible to MF0ICU1
n Field programmable read-only locking function per page for first 512-bit
n Field programmable read-only locking function per block
n 32-bit user definable One-Time Programmable (OTP) area
n 16-bit counter
n Data retention of 5 years
n Write endurance 10000 cycles
MF0ICU2_SDS_32 © NXP B.V. 2009. All rights reserved.
Product short data sheet
PUBLIC
Rev. 3 — 19 May 2009
171432 3 of 15
NXP Semiconductors
MF0ICU2
MIFARE Ultralight C
3. Applications
n Public transport
n Event ticketing
n Prepaid applications
n Loyalty schemes
n NFC Forum Tag Type 2
n Toy and amusement
4. Quick reference data
[1] Stresses above one or more of the limiting values may cause permanent damage to the device.
[2] These are stress ratings only. Operation of the device at these or any other conditions above those given in the Characteristics section
of the specification is not implied.
[3] Exposure to limiting values for extended periods may affect device reliability.
[4] LCR meter HP 4285, T
amb
= 22 °C, Cp-D, f
i
= 13.56 MHz, 2 Veff.
5. Ordering information
[1] 17 pF version.
[2] 50 pF version.
Table 1. Quick reference data
[1][2][3]
Symbol Parameter Conditions Min Typ Max Unit
f
i
input frequency - 13.56 - MHz
C
i
input capacitance 17 pF version (bare silicon and
MOA4)
[4]
14.08 16 17.92 pF
50 pF version
[4]
44 50 56 pF
EEPROM characteristics
t
cy(W)
write cycle time - 4.1 - ms
t
ret
retention time T
amb
= 22 °C 5--year
N
endu(W)
write endurance T
amb
= 22 °C 10000 - - cycle
Table 2. Ordering information
Type number Package
Name Description Version
MF0ICU2001DUD - 8 inch wafer (sawn, laser diced; 120 µm thickness, on film frame carrier;
electronic fail die marking according to SECSII format)
[1]
-
MF0ICU2101DUD - 8 inch wafer (sawn, laser diced; 120 µm thickness, on film frame carrier;
electronic fail die marking according to SECSII format)
[2]
-
MF0MOU2001DA4 PLLMC plastic leadless module carrier package; 35 mm wide tape
[1]
SOT500-2
MF0MOU2101DA4 PLLMC plastic leadless module carrier package; 35 mm wide tape
[2]
SOT500-2
P1-P3P4-P6P7-P9P10-P12P13-P15

MF0MOU2001DA4,118

Mfr. #:
Buy MF0MOU2001DA4,118
Manufacturer:
NXP Semiconductors
Description:
RF Transceiver MIFARE Ultralight C PLLMC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet