DG4051E, DG4052E, DG4053E
www.vishay.com
Vishay Siliconix
S16-0623-Rev. A, 11-Apr-16
7
Document Number: 69685
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
a. V
IN
= input voltage to perform proper function.
b. Room = 25 °C, full = as determined by the operating temperature suffix.
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet.
e. Guaranteed by design, not subject to production test.
SPECIFICATIONS FOR UNIPOLAR SUPPLIES
PARAMETER SYMBOL
TEST CONDITIONS
UNLESS OTHERWISE SPECIFIED
V+ = 3 V, V- = 0 V
V
IN(A, B, C, and enable)
= 1.4 V, 0.6 V
a
TEMP.
b
TYP.
c
-40 °C to +125 °C -40 °C to +85 °C
UNIT
MIN.
d
MAX.
d
MIN.
d
MAX.
d
Analog Switch
Analog Signal Range
e
V
ANALOG
Full - 0 3 0 3 V
On-Resistance R
ON
I
S
= 1 mA, V
D
= 1.5 V
Room 221 - - - -
Full - - - - -
Switch Off
Leakage Current
I
S(off)
V+ = 3.3 V, V- = 0 V
V
D
= 0.3 V / 3 V, V
S
= 3 V / 0.3 V
Room ± 0.02 -1 1 -1 1
nA
Full - -50 50 -5 5
I
D(off)
Room ± 0.02 -1 1 -1 1
Full - -50 50 -5 5
Channel On
Leakage Current
I
D(on)
V+ = 3.3 V, V- = 0 V
V
D
= V
S
= 0.3 V / 3 V
Room ± 0.02 -1 1 -1 1
Full - -50 50 -5 5
Digital Control
Input Current, V
IN
Low I
L
V
IN(A, B, C, and enable)
under test = 0.6 V
Full 0.02 -1 1 -1 1
μA
Input Current, V
IN
High I
H
V
IN(A, B, C, and enable)
under test = 1.4 V
Full 0.02 -1 1 -1 1
Dynamic Characteristics
Transition Time t
TRANS
R
L
= 300 , C
L
= 35 pF
see Fig. 1, 2, 3
Room 200 - - - -
ns
Full - - - - -
Enable Turn-On Time t
ON
Room 130 - - - -
Full - - - - -
Enable Turn-Off Time t
OFF
Room 78 - - - -
Full - - - - -
Break-Before-Make
Time Delay
t
D
Room 130 - - - -
Full - - - - -
Charge Injection
e
QV
g
= 0 V, R
g
= 0 , C
L
= 1 nF Room 0.34 - - - - pC
Off Isolation
e
OIRR
R
L
= 50 , C
L
= 1 pF
f = 100 kHz
Room -88 - - - -
dB
Channel-to-Channel
Crosstalk
e
X
TALK
Room -105 - - - -
Source Off
Capacitance
e
C
S(off)
f = 1 MHz
DG4051E Room 2.6 - - - -
pF
DG4052E Room 2.6 - - - -
DG4053E Room 2.5 - - - -
Drain Off Capacitance
e
C
D(off)
f = 1 MHz
DG4051E Room 10.7 - - - -
DG4052E Room 5.7 - - - -
DG4053E Room 3.6 - - - -
Channel On
Capacitance
e
C
D(on)
f = 1 MHz
DG4051E Room 16.4 - - - -
DG4052E Room 10.9 - - - -
DG4053E Room 9.1 - - - -
Power Supplies
Power Supply Current I+
V
IN(A, B, C, and enable)
= 0 V or 3 V
Room 0.05 - 1 - 1
μA
Full - - 10 - 10
Negative Supply
Current
I-
Room -0.05 -1 - -1 -
Full - -10 - -10 -
Ground Current I
GND
Room -0.05 -1 - -1 -
Full - -10 - -10 -