OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MAMX-011009-TR1000

P1-P3P4-P6P7-P8
Sub-Harmonic Pumped Mixer
14 - 32 GHz
Rev. V1
MAMX-011009
1
1
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
1
Features
 Up or Down Frequency Mixer
 Low Conversion Loss: 11 dB
 2xLO & 3xLO Rejection: 50 dB
 RF Frequency: 14 - 32 GHz
 LO Frequency: 4 - 20 GHz
 IF Frequency: DC - 7 GHz
 Lead-Free 1.5x1.2 mm 6-lead TDFN Package
 Halogen-Free “Green” Mold Compound
 RoHS* Complaint and 260
o
C Reflow
Description
The MAMX-011009 is a lead-free 1.5 x 1.2 mm
TDFN surface mount plastic packaged sub-harmonic
mixer. No bias is required, although DC-offset on the
IF port can improve performance.
The MAMX-011009 can be used for up or down
frequency conversion. The mixer integrates an 180
o
balanced diode topology that allows the LO to be
injected at ½ the mixing LO frequency. This
improves LO isolation and simplifies system
requirements.
When used as a down converting mixer, it can
convert RF port signals from 14 to 32 GHz to IF port
signals of DC to 7 GHz.
When used as an up converting mixer, it can convert
IF port signals from DC to 7 GHz to RF port signals
of 14 to 32 GHz.
In either mode the +15 dBm LO signal of 4 to 20
GHz drives the frequency conversion at ½ the
mixing product. Typical conversion loss is 11 dB
with 2xLO and 3xLO isolation typically greater than
50 dB. Typical input IP3 is greater than +12 dBm.
Ordering Information
3,4
Part Number Package
MAMX-011009-TR1000 1000 piece reel
MAMX-011009-001SMB Sample Board
MAMX-011009 bulk
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
Functional Schematic
Pin Configuration
1
3. Reference Application Note M513 for reel size information.
4. All sample boards include 5 loose parts.
Pin No. Pin Name Description
1 RF Mixer RF port
2 N/C No Connection
3 IF Mixer IF port
4 N/C No Connection
5 N/C No Connection
6 LO Mixer LO port
7 Paddle
2
Primary Ground
1. M/A-COM Technology Solutions recommends connecting
unused package pins to ground.
2. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
Sub-Harmonic Pumped Mixer
14 - 32 GHz
Rev. V1
MAMX-011009
2
2
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
2
Electrical Specifications: IF Freq. = 2 GHz, LO Drive = +15 dBm ,T
A
= 25°C, Z
0
= 50 Ω
Unless otherwise noted all measurement are as an up converter.
Absolute Maximum Ratings
6,7
Parameter Absolute Maximum
Input Power +25 dBm
Junction Temperature
8
+150°C
Operating Temperature -40°C to +85°C
Storage Temperature -65°C to +150°C
6. Exceeding any one or combination of these limits may cause
permanent damage to this device.
7. M/A-COM Technology Solutions does not recommend
sustained operation near these survivability limits.
8. Operating at nominal conditions with T
J
≤ +150°C will ensure
MTTF > 1 x 10
6
hours.
Parameter Test Conditions Units Min. Typ. Max.
Frequency
RF
IF
LO
GHz —
24
2
11
—
RF Return Loss 16 - 30 GHz dB — 8 —
IF Return Loss DC - 7 GHz dB — 10 —
Down Conversion Loss
16 GHz
24 GHz
32 GHz
dB —
13
11
12
—
Up Conversion Loss
16 GHz
24 GHz
32 GHz
dB —
12
10
11
—
11
—
Input IP3
Down Conversion
Up Conversion
dB —
+12
+14
—
Down Conversion Isolation
LO to IF
2LO to IF
3LO to IF
RF to IF
dB —
30
55
50
18
—
Up Conversion Isolation
LO to RF
5
2LO to RF
5
3LO to RF
IF to RF
dB
18
48
—
—
25
50
40
35
—
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
Class 1A (HBM) devices.
5. Measured at 24 GHz RF.
Sub-Harmonic Pumped Mixer
14 - 32 GHz
Rev. V1
MAMX-011009
3
3
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
3
Application Schematic
Parts List
Part Value Case Style
R1 - R3 0 Ω 0201
PCB Layout
PCB Footprint
Application Information
The MAMX-011009 is designed to be economical
and easy to use. By employing a sub-harmonic
topology, the user only has to deal with one high
frequency port (RF). This simplifies system design,
lowers cost, and combined with an ultra-small
plastic package delivers a superior system solution.
The MAMX-011009 design allows bi-direction
frequency conversion (IF to RF or RF to IF). The
conversion loss, isolation, and linearity are similar
either way.
For proper up or down frequency mixing the
MAMX-011009 must be driven with sufficient power
to activate the mixing diodes, typically 14 dBm or
higher. We highly recommend M/A-COM
Technology Solutions MAAM-011101, which has
been engineered to match the LO requirements of
the MAMX-011009.
Grounding
The printed circuit board (PCB) layout is simple for
the MAMX-011009 since no external components
are needed. The LO port is internally DC blocked;
DC voltages up to 20 V are acceptable. However,
proper grounding must be used for operation. It is
recommended that the total common ground
inductance not exceed 0.03 nH. This is equivalent
to placing a least four 8-mil (200 μm) diameter vias
under the device, assuming an 8-mil (200 μm) thick
RF layer to ground. More ground vias are recom-
mended if possible.
Up Conversion Summary
0
10
20
30
40
0
20
40
60
80
14 18 22 26 30
Conversion Loss
Input IP3
IF to RF Isolation
2xLO to RF Isolation
3xLO to RF Isolation
RF Frequency (GHz)
P1-P3P4-P6P7-P8

MAMX-011009-TR1000

Mfr. #:
Buy MAMX-011009-TR1000
Manufacturer:
MACOM
Description:
IC MIXER 14-32GHZ 6TDFN
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet