OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

PIC16LF18424-I/P

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18
PIC16(L)F184XX
Full-Featured, Low Pin Count Microcontrollers with XLP
Product Brief
Description
PIC16(L)F184XX microcontrollers feature Intelligent Analog, Core Independent Peripherals (CIPs) and
communication peripherals combined with eXtreme Low-Power (XLP) for a wide range of general
purpose and low-power applications. Features such as a 12-bit Analog-to-Digital Converter with
Computation (ADC
2
), Memory Access Partitioning (MAP), the Device Information Area (DIA), Power-
saving operating modes, and Peripheral Pin Select (PPS), offer flexible solutions for a wide variety of
custom applications.
Core Features
• C Compiler Optimized RISC Architecture
• Only 48 instructions
• Operating Speed:
– DC – 32 MHz clock input
– 125 ns minimum instruction cycle
• Interrupt Capability
• 16-Level Deep Hardware Stack
• Timers:
– Up to two 24-bit timers
– Up to four 8-bit timers
– Up to four 16-bit timers
• Low-Current Power-on Reset (POR)
• Configurable Power-up Timer (PWRTE)
• Brown-out Reset (BOR)
• Low-Power BOR (LPBOR) Option
• Windowed Watchdog Timer (WWDT):
– Variable prescaler selection
– Variable window size selection
– Configurable in hardware (Configuration Words) and/or software
• Programmable Code Protection
Memory
• Up to 28 KB Program Flash Memory
• Up to 2 KB Data SRAM Memory
• 256B Data EEPROM
© 2017 Microchip Technology Inc.
Product Brief
DS40001894B-page 1
• Direct, Indirect and Relative Addressing modes
• Memory Access Partition (MAP):
– Write-protect
– Customizable partition
• Device Information Area (DIA)
• Device Configuration Information (DCI)
Operating Characteristics
• Operating Voltage Range:
– 1.8V to 3.6V (PIC16LF184XX)
– 2.3V to 5.5V (PIC16F184XX)
• Temperature Range:
– Industrial: -40°C to 85°C
– Extended: -40°C to 125°C
Power-Saving Operation Modes
• Doze: CPU and Peripherals Running at Different Cycle Rates (typically CPU is lower)
• Idle: CPU Halted While Peripherals Operate
• Sleep: Lowest Power Consumption
• Peripheral Module Disable (PMD):
– Ability to selectively disable hardware module to minimize active power consumption of unused
peripherals
eXtreme Low-Power (XLP) Features
• Sleep mode: 50 nA @ 1.8, typical
• Watchdog Timer: 500 nA @ 1.8V, typical
• Secondary Oscillator: 500 nA @ 32 kHz
• Operating Current:
– 8 uA @ 32 kHz, 1.8V, typical
– 32 uA/MHz @ 1.8V, typical
Digital Peripherals
• Configurable Logic Cell (CLC):
– 4 CLCs
– Integrated combinational and sequential logic
• Complementary Waveform Generator (CWG):
– Up to 3 CWGs
– Rising and falling edge dead-band control
– Full-bridge, half-bridge, 1-channel drive
– Multiple signal sources
• Capture/Compare/PWM (CCP) modules:
PIC16(L)F184XX
© 2017 Microchip Technology Inc.
Product Brief
DS40001894B-page 2
– Up to 5 CCPs
– 16-bit resolution for Capture/Compare modes
– 10-bit resolution for PWM mode
• Pulse-Width Modulators (PWM):
– 2 10-bit PWMs
• Numerically Controlled Oscillator (NCO):
– Precision linear frequency generator (@50% duty cycle) with 0.0001% step size of source input
clock
– Input Clock: 0 Hz < f
NCO
< 32 MHz
– Resolution: f
NCO
/2
20
• Peripheral Pin Select (PPS):
– I/O pin remapping of digital peripherals
• Serial Communications:
– EUSART
• Up to 2 EUSARTs
• RS-232, RS-485, LIN compatible
• Auto-Baud Detect, Auto-wake-up on Start.
– Master Synchronous Serial Port (MSSP)
• Up to 2 MSSPs
• SPI
• I
2
C, SMBus and PMBus
™
compatible
• Data Signal Modulator (DSM)
– Modulates a carrier signal with digital data to create custom carrier synchronized output
waveforms
• Up to 26 I/O Pins:
– Individually programmable pull-ups
– Slew rate control
– Interrupt-on-change with edge-select
– Input level selection control (ST or TTL)
– Digital open-drain enable
• Timer modules:
– Timer0:
• 8/16-bit timer/counter
• Synchronous or asynchronous operation
• Programmable prescaler/postscaler
• Time base for capture/compare function
– Timer1/3/5 with gate control:
• 16-bit timer/counter
• Programmable internal or external clock sources
• Multiple gate sources
• Multiple gate modes
• Time base for capture/compare function
– Timer2/4/6 with Hardware Limit Timer:
• 8-bit timers
PIC16(L)F184XX
© 2017 Microchip Technology Inc.
Product Brief
DS40001894B-page 3
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18

PIC16LF18424-I/P

Mfr. #:
Buy PIC16LF18424-I/P
Manufacturer:
Microchip Technology
Description:
8-bit Microcontrollers - MCU 7KB, 512B RAM, 2xPWMs, Comparator, DAC, 12-bit ADCC, CWG, EUSART, SPI/I2C
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet