AXK7L, 8L
PRODUCT TYPES
Notes: 1. Regarding ordering units;
During production: Please make orders in 1-reel units.
Samples for mounting confirmation: Available in units of 50 pieces. Please contact us.
Samples: Available. Please contact us.
2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our
sales office.
3. Please contact us regarding different number of contacts.
4. “B” in the 11th digit of the header part number signifies a fork type soldering terminals to lessen the constraint on amount of solder when mounting, and a
construction that makes it difficult when mounting for excess solder to interfere with the socket.
Although compatible with the previous parts, these parts are not compatible with the recommended PC board pattern and recommended metal mask pattern.
SPECIFICATIONS
1. Characteristics
Mated height Number of contacts
Part number Packing
Socket Header
Inner carton
(1 reel)
Outer carton
0.9 mm
10 AXK7L10223G AXK8L10124BG
3,000 pieces
6,000 pieces
(2 reels)
12 AXK7L12223G AXK8L12124BG
14 AXK7L14223G AXK8L14124BG
16 AXK7L16223G AXK8L16124BG
20 AXK7L20223G AXK8L20124BG
22 AXK7L22223G AXK8L22124BG
24 AXK7L24223G AXK8L24124BG
26 AXK7L26223G AXK8L26124BG
28 AXK7L28223G AXK8L28124BG
30 AXK7L30223G AXK8L30124BG
32 AXK7L32223G AXK8L32124BG
34 AXK7L34223G AXK8L34124BG
36 AXK7L36223G AXK8L36124BG
38 AXK7L38223G AXK8L38124BG
40 AXK7L40223G AXK8L40124BG
44 AXK7L44223G AXK8L44124BG
48 AXK7L48223G AXK8L48124BG
50 AXK7L50223G AXK8L50124BG
54 AXK7L54223G AXK8L54124BG
60 AXK7L60223G AXK8L60124BG
66 AXK7L66223G AXK8L66124BG
70 AXK7L70223G AXK8L70124BG
80 AXK7L80223G AXK8L80124BG
Item Specifications Conditions
Electrical
characteristics
Rated current 0.3A/terminal (Max. 5 A at total terminals) —
Rated voltage 60V AC/DC —
Breakdown voltage 150V AC for 1 min.
Rated voltage is applied for one minute and check for
short circuit or damage with a detection current of 1mA
Insulation resistance Min. 1,000MΩ (Initial) Using 250V DC megger (applied for 1 min.)
Contact resistance Max. 90mΩ
Based on the contact resistance measurement method
specified by JIS C 5402.
Environmental
characteristics
Ambient temperature –55°C to +85°C No freezing at low temperatures
Soldering heat resistance
Max. peak temperature of 260°C (on the surface of the
PC board around the connector terminals)
Infrared reflow soldering
300°C within 5 sec, 350°C within 3 sec. Soldering iron
Storage temperature
–55°C to +85°C (Product only)
–40°C to +50°C (Emboss packing)
No freezing at low temperatures
Thermal shock resistance
(header and socket mated)
5 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
Sequence
1. –55 °C, 30 min.
2. ~ , Max. 5 min.
3. 85 °C, 30 min.
4. ~ , Max. 5 min.
Humidity resistance
(header and socket mated)
120 hours,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
Temperature 40±2°C,
humidity 90 to 95% R.H.
Saltwater spray resistance
(header and socket mated)
24 hours,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
Temperature 35±2°C,
saltwater concentration 5±1%
H2S resistance
(header and socket mated)
48 hours,
contact resistance max. 90mΩ
Temperature 40±2°C,
gas concentration 3±1 ppm, humidity 75 to 80% R.H.
Lifetime
characteristics
Insertion and removal life 50 times
Repeated insertion and removal speed of max. 200
times/hours
Unit weight 20 contacts; Socket: 0.03g Header: 0.01g —
0
–3
+3
0
panasonic-electric-works.net/ac