OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

AXK7L34223G

P1-P3P4-P6P7-P9
AXK7L, 8L
• Socket and header are mated
EMBOSSED TAPE DIMENSIONS (unit: mm) (Common for respective contact type, socket and header)
TABLE OF DIMENSIONS
Connector orientation with respect to direction of progress of embossed tape
Mated height Number of contacts Type of taping A B C D Quantity per reel
Common for
socket and header:
0.9mm
Max. 24 Tape I 16.0 — 7.5 17.4 3000
26 to 70 Tape I 24.0 — 11.5 25.4 3000
80 Tape II 32.0 28.4 14.2 33.4 3000
Socket
Header
0.90±0.15
Tape dimensions (Conforming to JIS C 0806-1990. However,
some tapes have mounting hole pitches that do not comply with
the standard.)
Tape I Tape II
1.75
C
8.0
A±0.3
4
2
1.5 dia.
+0.1
0
Pull out direction
1.75
C
8.0
A±0.3
4
2
Pull out direction
B
1.5 dia.
+0.1
0
Plastic reel dimensions (Conforming to EIAJ ET–7200B)
Top cover tape
Taping reel
Embossed carrier tape
Embossed mounting-hole
D±1
380 dia.
Type
Direction of
tape progress
Common for F4
Socket Header
Note: There is no indication on this product regarding top-bottom or left-right orientation.
panasonic-electric-works.net/ac
AXK7L, 8L
TABLE OF PRODUCT TYPES
✩: Available for sale
Notes: 1. Please inquire about numbers of contacts other than those given above.
2. Please inquire with us regarding delivery times.
3. Please keep the minimum unit for ordering no less than 50 pieces per lot.
4. Please inquire for further information.
PRODUCT TYPES
Notes: 1. When placing an order, substitute the “∗” (asterisk) in the above part number with the number of contacts for the required connector.
2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our
sales office.
For board-to-FPC
F4 Series
Connectors for
inspection usage
(0.4mm pitch)
Product name Number of contacts
F4
for inspection
10
12 14 16 20 22 24 26 28 30 32 34 36 38 40 44 48 50 54 60 66 70 80
✩ ✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩
Specifications Part No. Specifications Part No.
Socket Without positioning bosses AXK7LE∗∗26G Header Without positioning bosses AXK8LE∗∗26BG
FEATURES
1. 3,000 insertion and removals (when
as recommended)
2. Same external dimensions and foot
pattern as standard type.
3. Improved mating
Insertion and removal have become
easier due to a reduction in the mating
retention force required by the simple
locking structure and also in the amount
of force needed for insertion and
removal. (We cannot warrant anything
regarding mating retention.)
APPLICATIONS
Ideal for module unit inspection and
equipment assembly inspection
Socket Header
4.1mm
5.0mm
Compliance with RoHS Directive
panasonic-electric-works.net/ac
AXK7L, 8L
NOTES
1. Removal by pulling up from an end
causes the entire connector removal
force to concentrate on the soldering
terminals and end terminals.
Therefore, please lift and remove from
the side. Doing so will also prevent
cracking of the soldered parts.
2. PC Boards and Recommended
Metal Mask Patterns
Connectors are mounted with high
density, with a pitch interval of 0.4 to 0.5
mm.
In order to reduce solder bridge and
other issues make sure the proper levels
of solder are used.
The figures to the right are recommended
metal mask patterns. Please use them as
a reference.
Socket
Recommended PC board pattern
(Mount pad arrangement pattern)
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
(Terminal portion opening area ratio: 53 %)
(Metal portion opening area ratio: 100 %)
Recommended metal mask pattern
Metal mask thickness: Here, 120 µm
(Terminal portion opening area ratio: 66 %)
(Metal portion opening area ratio: 100 %)
Header
Recommended PC board pattern
(Mount pad arrangement pattern)
Relation between connector and mounting pad
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
(Terminal portion opening area ratio: 52 %)
(Metal portion opening area ratio: 80 %)
Recommended metal mask pattern
Metal mask thickness: Here, 120 µm
(Terminal portion opening area ratio: 66 %)
(Metal portion opening area ratio: 100 %)
In particular, if a lot of solder is
used in the header retaining
soldering terminals, it might
interfere with and cause incomplete
socket mating. Therefore, please
follow the recommended
conditions give on the right.
Pull
NG
3.60±0.03
1.40±0.03
4.00±0.03
0.23±0.03
5.60±0.03
0.40±0.03
C 0.40
1.00±0.03
0.40±0.01
0.20±0.01
5.40±0.01
4.42±0.01
(0.49)
(1.00)
C 0.40
1.00±0.01
3.60±0.01
1.40±0.01
5.60±0.01
5.40±0.01
0.20±0.01
0.40±0.01
4.18±0.01
(0.61)
1.00±0.01
3.60±0.01
(1.00)
1.40±0.01
5.60±0.01
C 0.40
: Insulation area
Max. 2.20
1.40±0.03
0.40±0.03
0.23±0.03
0.57±0.03
4.70±0.03
3.20±0.03
1.40±0.03
0.40±0.03
Mounting pad
: Insulation area
(3.20±0.03)
(4.70±0.03)
(Max. 2.20)
0.40±0.01
0.20±0.01
1.40±0.01
0.46±0.01
4.50±0.01
3.60±0.01
(0.45)
0.40±0.01
1.40±0.01
0.40±0.01
0.20±0.01
1.40±0.01
0.57±0.01
0.40±0.01
4.50±0.01
3.36±0.01
(0.57)
1.40±0.01
panasonic-electric-works.net/ac
For other details, please verify with the
product specification sheets.
P1-P3P4-P6P7-P9

AXK7L34223G

Mfr. #:
Buy AXK7L34223G
Manufacturer:
Panasonic
Description:
Board to Board & Mezzanine Connectors CONN SOCKET FPC .4MM 34POS SMD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet