PEDR45V032A-05
Issue Date: Nov. 08, 2011
MR45V032A
32k(4,096-Word 8-Bit) FeRAM (Ferroelectric Random Access Memory) SPI
1/20
GENERAL DESCRIPTION
The MR45V032A is a nonvolatile 4,096-word x 8-bit ferroelectric random access memory (FeRAM) developed
in the ferroelectric process and silicon-gate CMOS technology. The MR45V032A is accessed using Serial
Peripheral Interface.Unlike SRAMs, this device, whose cells are nonvolatile, eliminates battery backup required
to hold data. This device has no mechanisms of erasing and programming memory cells and blocks, such as
those used for various EEPROMs. Therefore, the write cycle time can be equal to the read cycle time and the
power consumption during a write can be reduced significantly.
The MR45V032A can be used in various applications, because the device is guaranteed for the write/read
tolerance of 10
12
cycles per bit and the rewrite count can be extended significantly.
FEATURES
• 4,096-word 8-bit configuration (Serial Peripheral Interface : SPI)
• A single 2.7V3.6V 3.3 V typ power supply
• Operating frequency: 15MHz
• Read/write tolerance 10
12
cycles/bit
Data retention 10 years
Guaranteed operating temperature range 40 to 85C (Extended temperature version)
• Package options:
8-pin plastic SOP (P-SOP8-200-1.27-T2K )
PEDR45V032A-05
MR45V032A
2/20
PIN CONFIGURATION
Note:
Signal names that end with # indicate that the signals are negative-true logic.
8-
p
in
p
lastic SOP
CS#
SO
WP#
VSS
VCC
HOLD#
SCK
SI
1 8
2 7
3 6
4 5
MR45V032A
PEDR45V032A-05
MR45V032A
3/20
PIN DESCRIPTIONS
Pin Name
Description
CS#
Chip Select (input, negative logic)
Latches an address by low input, activates the FeRAM, and enables a read or write
operation.
WP#
Write Protect( input , negative logic )
Write Protect pin controls write-operation to the status-register(BP0,BP1). This pin should
be fixed low or high in write-operations.
HOLD#
HOLD( input , negative logic )
Hold pin is used when the serial-communication suspended without disable the chip
select. When HOLD# is low ,the serial-output is in High-Z status and
serial-input/serial-clock are “Dont Care” . CS# should be low in hold operation.
SCK
Serial Clock
Serial Clock is the clock input pin for setting for serial data timing. Inputs are latched on
the rising edge and output occur on the falling edge.
SI
Serial input
SI pins are serial input pins for Operation-code , addresses ,and data-inputs .
SO
Serial output
SO pins are serial output pins.
V
CC
, V
SS
Power supply
Apply the specified voltage to V
CC
. Connect V
SS
to ground.

MR45V032AMAZBATL

Mfr. #:
Manufacturer:
Description:
F-RAM 32K; SPI; 3.3V FeRAM 15MHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet