NPN Silicon Phototransistor
OP550, OP552, OP555, OP560, OP565,
OP750, OP755 Series
© TT electronics plc
Issue A 08/2016 Page 1
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
OP550, OP552, OP555, OP750, OP755, OP770 and OP775 series consists of a NPN silicon phototransistor molded in an
epoxy package with a wide receiving angle that provides relaƟvely even recepƟon over a large area. The OP750, OP755,
OP770 and OP775 have addiƟonal circuitry to enhance the operaƟon of the device for stray light levels.
OP560 and OP565 series consists of a NPN silicon photodarlington transistor molded in an epoxy package with a wide
receiving angle that provides relaƟvely even recepƟon over a large area.
The side-looking package design allows easy PCBoard mounƟng of sloƩed opƟcal switches or opƟcal interrupt detectors.
The OP550, OP560, OP750 and OP770 devices have an external lens in a clear epoxy package.
The OP552 device has an integral lens in an opaque plasƟc package that is opƟcally transparent to infrared light but opaque
to visible wavelengths. This feature allows the device to be used under high ambient light condiƟons – or anywhere
external light sources could interfere with the intended sensing applicaƟon (visible light immunity).
The OP555, OP565, OP755 and OP775 devices have an internal lens in a blue-Ɵnted package. The lensing eīect of this
package allows an acceptance half-angle of 28° when measured from the opƟcal axis to the half-power point.
These devices are 100% producƟon tested using infrared light for close correlaƟon with OPTEK’s GaAs and GaAIAs emiƩers.
All of these sensors are mechanically and spectrally matched to the OP140, OP142, OP145, OP240 and OP245 series of
infrared emiƫng diodes.
Please refer to ApplicaƟon BulleƟns 208 and 210 for addiƟonal design informaƟon and reliability (degradaƟon) data.
For custom versions please contact your OPTEK representaƟve.
• ApplicaƟons requiring
wide receiving angle
• ApplicaƟons requiring
PCBoard mounƟng
• Space-limited applicaƟons
• OpƟcal switches
• OpƟcal interrupt detectors
• OpƟcal encoders
• Non-contact posiƟon
sensing
• Machine automaƟon
• Wide receiving angle
• Four sensiƟvity ranges
• Side-looking package
• Ideal for space-limited applicaƟons
• Ideal for PCBoard mounƟng
• Choice of clear, opaque or blue-Ɵnted package
OP550
OP560
OP750
OP770
OP555
OP565
OP755
OP775
OP552
55 = Phototransistor
= Highest sensitivity level
56 = Photodarlington B = Sensitivity Level with Min. Max.
75 = Phototransistor with R
BE
C = Middle Sensitivity Level
77 = Phototransistor with C
CE
D = Lowest Sensitivity Level
0
= Extended Lens - Clear Package
2
= Extended Lens - Blue Tinted Package
5 = Integral Lens - Blue Tinted Package
OP550A OP552A OP555A OP560A OP565A OP750A OP755A OP770A OP775A
OP550B OP552B OP555B OP560B OP565B OP750B OP755B OP770B OP775B
OP550C OP552C OP555C OP560C OP565C OP750C OP755C OP770C OP775C
OP550D OP552D OP555D OP750D OP755D OP770D OP775D
Available Part Numbers
OP __ __ __ __
RoHS