Obsolete Product(s) - Obsolete Product(s)
+V
S
(V)
V
IN
(mV)
V
ST-BY
pin 7
I
q
(mA)
ST-BY
MUTE
PLAY MUTE ST-BY
+18
1.8
0.8
V
MUTE
pin 6
4.1
2.3
OFF
OFF
D96AU259
V
OUT
(V)
2.9
1.3
Figure 2:
Microprocessor Driving Signals.
(B) Low Cost Application
In low cost applications where the mP is not pre-
sent, the suggested circuit is shown in fig.3.
The St-by and mute terminals are tied together
and they are connected to the supply line via an
external voltage divider.
The device is switched-on/off from the supply line
and the external capacitor C4 is intended to delay
the St-by and mute threshold exceeding, avoiding
"Popping" problems.
TDA7266S
4/8
Obsolete Product(s) - Obsolete Product(s)
