OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MC100EP90DTR2G

P1-P3P4-P6P7-P9
© Semiconductor Components Industries, LLC, 2014
May, 2014 − Rev. 7
1 Publication Order Number:
MC10EP90/D
MC10EP90, MC100EP90
-3.3V / -5V Triple ECL Input
to LVPECL/PECL Output
Translator
Description
The MC10/100EP90 is a TRIPLE ECL TO LVPECL/PECL
translator. The device receives differential LVECL or ECL signals and
translates them to differential LVPECL or PECL output signals.
A V
BB
output is provided for interfacing with Single−Ended LVECL
or ECL signals at the input. If a Single−Ended input is to be used the
V
BB
output should be connected to the D input. The active signal would
then drive the D input. When used the V
BB
output should be bypassed
to ground by a 0.01 mF capacitor. The V
BB
output is designed to act as
the switching reference for the EP90 under Single−Ended input
switching conditions, as a result this pin can only source/sink up to
0.5 mA of current.
To accomplish the level translation the EP90 requires three power
rails. The V
CC
supply should be connected to the positive supply, and
the V
EE
connected to the negative supply.
The 100 Series contains temperature compensation.
Features
• 260 ps Typical Propagation Delay
• Maximum Frequency > 3 GHz Typical
• Voltage Supplies V
CC
= 3.0 V to 5.5 V, V
EE
= −3.0 V to −5.5 V,
GND = 0 V
• Open Input Default State
• Safety Clamp on Inputs
• Fully Differential Design
• Q Output Will Default LOW with Inputs Open or at V
EE
• V
BB
Output
• These are Pb−Free Devices*
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
TSSOP−20
DT SUFFIX
CASE 948E
MARKING DIAGRAM*
xxxx = MC10 or 100
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
xxxx
EP90
ALYWG
G
1
20
http://onsemi.com
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
ORDERING INFORMATION
MC10EP90, MC100EP90
http://onsemi.com
2
D1D0
D2V
BB
1718 16 15 14 13 12
43 56789
Q0
11
10
GND Q1 GND Q2 Q2 V
CC
D0
1920
21
V
CC
Q0
D1V
CC
V
BB
V
EE
D2
Q1
LVPECL/
PECL
ECL
LVPECL/
PECL
ECL
LVPECL/
PECL
ECL
Table 1. PIN DESCRIPTION
PIN
Q(0:2), Q
(0:2)
D(0:2)*, D(0:2)* Differential LVECL or ECL Inputs
FUNCTION
Differential LVPECL or PECL Outputs
V
CC
GND Ground
Positive Supply
V
EE
V
BB
Output Reference Supply
Negative Supply
−5V ECL to 5V PECL
−5V ECL to 3.3V PECL
−3.3V ECL to 5V PECL
−3.3V ECL to 3.3V PECL
Table 2. FUNCTION TABLE
5 V
3.3 V
5 V
3.3 V
0 V
0 V
0 V
0 V
−5 V
−5 V
−3.3 V
−3.3 V
Function V
CC
V
EE
GND
Warning: All V
CC
, V
EE
and GND pins must be externally connected to
Power Supply to guarantee proper operation.
Figure 1. TSSOP−20 (Top View) and Logic Diagram
* Pins will default LOW when left open.
Table 3. ATTRIBUTES
Characteristics Value
Internal Input Pulldown Resistor
75 kW
Internal Input Pullup Resistor N/A
ESD Protection Human Body Model
Machine Model
Charged Device Model
> 2 kV
> 200 V
> 2 kV
Moisture Sensitivity, Indefinite Time Out of Drypack (Note 1) Pb Pkg Pb−Free Pkg
TSSOP−20 Level 1 Level 1
Flammability Rating Oxygen Index: 28 to 34 UL 94 V−0 @ 0.125 in
Transistor Count 350 Devices
Meets or exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
1. For additional information, refer to Application Note AND8003/D.
MC10EP90, MC100EP90
http://onsemi.com
3
Table 4. MAXIMUM RATINGS
Symbol Parameter Condition 1 Condition 2 Rating Unit
V
CC
PECL Mode Power Supply GND = 0 V 6 V
V
EE
NECL Mode Power Supply GND = 0 V −6 V
V
I
PECL Mode Input Voltage
NECL Mode Input Voltage
GND = 0 V
GND = 0 V
V
I
V
CC
V
I
V
EE
6
−6
V
V
I
out
Output Current Continuous
Surge
50
100
mA
mA
I
BB
V
BB
Sink/Source ± 0.5 mA
T
A
Operating Temperature Range −40 to +85 °C
T
stg
Storage Temperature Range −65 to +150 °C
q
JA
Thermal Resistance (Junction−to−Ambient) 0 lfpm
500 lfpm
TSSOP−20
TSSOP−20
140
100
°C/W
°C/W
q
JC
Thermal Resistance (Junction−to−Case) Standard Board TSSOP−20 23 to 41 °C/W
T
sol
Wave Solder Pb
Pb−Free
<2 to 3 sec @ 248°C
<2 to 3 sec @ 260°C
265
265
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
P1-P3P4-P6P7-P9

MC100EP90DTR2G

Mfr. #:
Buy MC100EP90DTR2G
Manufacturer:
ON Semiconductor
Description:
Translation - Voltage Levels 3.3V/5V Triple ECL to LVPECL/PECL
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet