MK5811SLF

MK5811
LOW EMI CLOCK GENERATOR SSCG
IDT™ / ICS™
LOW EMI CLOCK GENERATOR 4
MK5811 REV F 051310
In the equation, C
L
is the crystal load capacitance. For
example, a crystal with a 16 pF load capacitance uses two
20 pF [(16-6) x 2] capacitors.
Spread Spectrum Profile
The MK5811 is a low EMI clock generator using a optimized
frequency slew rate algorithm to facilitate down stream
tracking of zero delay buffers and other PLL devices.
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the MK5811. These ratings, which are
standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device, at
these or any other conditions, above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical
parameters are guaranteed only over the recommended operating temperature range.
Recommended Operation Conditions
Time
Frequency
Modulation Rate
Item Rating
Supply Voltage, VDD 7 V
All Inputs and Outputs -0.5 V to VDD+0.5 V
Ambient Operating Temperature 0 to +85° C
Storage Temperature -65 to +150° C
Junction Temperature 125° C
Soldering Temperature 260° C
Parameter Min. Typ. Max. Units
Ambient Operating Temperature 0 +85 ° C
Power Supply Voltage (measured in respect to GND) +3.0 3.63 V
MK5811
LOW EMI CLOCK GENERATOR SSCG
IDT™ / ICS™
LOW EMI CLOCK GENERATOR 5
MK5811 REV F 051310
DC Electrical Characteristics
Unless stated otherwise, VDD = 3.3 V ±10%, Ambient Temperature 0 to +85° C
AC Electrical Characteristics
Unless stated otherwise, VDD = 3.3 V ±10%, Ambient Temperature 0 to +85° C, C
L
= 15 pF
Note 1: Spread is enabled.
Thermal Characteristics
Parameter Symbol Conditions Min. Typ. Max. Units
Operating Voltage VDD 3.0 3.3 3.63 V
Supply Current IDD No load, at 3.3 V, Fin=12 MHz 23 25 mA
No load, at 3.3 V, Fin=24 MHz 30 mA
No load, at 3.3 V, Fin=32 MHz 35 mA
Input High Voltage V
IH
0.85VDD VDD VDD V
Input middle Voltage V
IHM
0.4VDD 0.5VDD 0.6VDD V
Input Low Voltage V
IL
0.0 0.0 0.15VDD V
Output High Voltage V
OH
CMOS, I
OH
= -4 mA 2.4 V
Output High Voltage V
OH
I
OH
= -6 mA 2.0 V
Output Low Voltage V
OL
I
OL
= -4 mA 0.4 V
I
OL
= -10 mA 1.2 V
Input Capacitance C
IN1
S0, S1, FRSEL pins 4 6 pF
C
IN2
X1, X2 pins 6 9 pF
Parameter Symbol Conditions Min. Typ. Max. Units
Input Clock Frequency 4 32 MHz
Output Clock Frequency 4 32 MHz
Input Clock Duty Cycle Time above VDD/2 40 60 %
Output Clock Duty Cycle Time above 1.5 V 45 50 55 %
Cycle-to-cycle Jitter
1
Fin=4 MHz, Fout=4 MHz 350 800 ps
Cycle-to-cycle Jitter
1
Fin=8 MHz, Fout=8 MHz 250 450 ps
Output Rise Time t
R
0.4 to 2.4 V 1.6 5.0 ns
Output Fall Time t
F
2.4 to 0.4 V 1.6 4.4 ns
EMI Peak Frequency Reduction 8 to 16 dB
Parameter Symbol Conditions Min. Typ. Max. Units
Thermal Resistance Junction to
Ambient
θ
JA
Still air 150 ° C/W
θ
JA
1 m/s air flow 140 ° C/W
θ
JA
3 m/s air flow 120 ° C/W
Thermal Resistance Junction to Case θ
JC
40 ° C/W
MK5811
LOW EMI CLOCK GENERATOR SSCG
IDT™ / ICS™
LOW EMI CLOCK GENERATOR 6
MK5811 REV F 051310
Package Outline and Package Dimensions (8-pin SOIC, 150 Mil. Body)
Package dimensions are kept current with JEDEC Publication No. 95
Ordering Information
Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Inc. (IDT)
assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from
its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other
applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are
not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT
does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
Part / Order Number Marking Shipping Packaging Package Temperature
MK5811SLF 5811SL Tubes 8-pin SOIC 0 to +85° C
MK5811SLFTR 5811SL Tape and Reel 8-pin SOIC 0 to +85° C
INDEX
AREA
1 2
8
D
E
SEATING
PLANE
A1
A
e
- C -
B
.10 (.004)
C
C
L
H
h x 45
Millimeters Inches
Symbol Min Max Min Max
A 1.35 1.75 .0532 .0688
A1 0.10 0.25 .0040 .0098
B 0.330.51.013.020
C 0.19 0.25 .0075 .0098
D 4.80 5.00 .1890 .1968
E 3.80 4.00 .1497 .1574
e 1.27 BASIC 0.050 BASIC
H 5.80 6.20 .2284 .2440
h 0.250.50.010.020
L 0.401.27.016.050
α 0° 8° 0° 8°

MK5811SLF

Mfr. #:
Manufacturer:
IDT
Description:
Clock Generators & Support Products LOW EMI CLOCK GENERATOR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet