F339X241030MFM2B0

F339X2 305VAC
www.vishay.com
Vishay BCcomponents
Revision: 27-Feb-18
13
Document Number: 26072
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
7. Resistance
to solvents
D MIL-STD-202 method 215.
- Also aqueous chemical
- OKEM clean or equivalent.
Do not use banned solvents.
5No visual damage
Legible marking
8. Mechanical
shock
D 100 g's ; 6 ms
half-sine; 3.75 m/s
30 No visual damage
9. Vibration D 5 g's for 20 min
12 cycles x 3 directions
10 Hz to 2000 Hz
30 No visual damage
10. Resistance to
soldering heat
D Temp.: 280 °C; time: 10 s
solder within 1.5 mm of device body
30 |C/C| 5 %
Increase of tan : 0.008 for C 1 µF at 10 kHz
IR > 50 % of initial specified value
11. Solderability D Leaded: method A at 235 °C,
category 3 (245 °C / 3 s)
15 Good tinning as evidence by free flowing of the
solder with wetting of terminations > 95 %
12. Electrical
characterization
-30-
13. Flammability One flame application
Class B
15 V-0 or V-1 are acceptable.
Class B or C according IEC is also acceptable
AUTOMOTIVE AEC-Q200, REVISION D QUALIFICIATION
STRESS REVISION CONDITION
SAMPLE
SIZE
PERFORMANCE REQUIREMENTS
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

F339X241030MFM2B0

Mfr. #:
Manufacturer:
Description:
Safety Capacitors 0.1uF 305Vac 20%
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union