OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

BPM15-050-Q48N-C

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P29
BPM15 Series
Encapsulated Isolated Wide Input Bipolar 15-Watt DC-DC Converters
MDC_BPM15.A02 Page 10 of 29
www.murata-ps.com/support
PERFORMANCE DATA, BPM15-120-Q12
Maximum Current Temperature Derating at Sea Level
(VIN = 30V, airfl ow is from pin 1 to pin 4)
Maximum Current Temperature Derating at Sea Level
(VIN = 18V, airfl ow is from pin 1 to pin 4)
Maximum Current Temperature Derating at Sea Level
(VIN = 36V, airfl ow is from pin 1 to pin 4)
Maximum Current Temperature Derating at Sea Level
(VIN = 24V, airfl ow is from pin 1 to pin 4)
0
0.6
0.7
30 35 40 45 50 55 60 65 70 75 80 85
0.33 m/s (65 LFM)
0.5 m/s (100 LFM)
1.0 m/s (200 LFM)
1.5 m/s (300 LFM)
2.0 m/s (400 LFM)
0.1
0.2
0.3
0.4
0.5
Ambient Temperature (ºC)
Output Current (A)
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
30 35 40 45 50 55 60 65 70 75 80 85
0.33 m/s (65 LFM)
0.5 m/s (100 LFM)
1.0 m/s (200 LFM)
1.5 m/s (300 LFM)
2.0 m/s (400 LFM)
Ambient Temperature (ºC)
Output Current (A)
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
30 35 40 45 50 55 60 65 70 75 80 85
0.33 m/s (65 LFM)
0.5 m/s (100 LFM)
1.0 m/s (200 LFM)
1.5 m/s (300 LFM)
2.0 m/s (400 LFM)
Ambient Temperature
(
ºC
)
Output Current (A)
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
30 35 40 45 50 55 60 65 70 75 80 85
0.33 m/s (65 LFM)
0.5 m/s (100 LFM)
1.0 m/s (200 LFM)
1.5 m/s (300 LFM)
2.0 m/s (400 LFM)
Ambient Tem
p
erature
(
ºC
)
Output Current (A)
BPM15 Series
Encapsulated Isolated Wide Input Bipolar 15-Watt DC-DC Converters
MDC_BPM15.A02 Page 11 of 29
www.murata-ps.com/support
FUNCTIONAL SPECIFICATIONS, BPM15-150-Q12
ABSOLUTE MAXIMUM RATINGS
Conditions ➀
Minimum Typical/Nominal Maximum Units
Input Voltage, Continuous 036
Vdc
Input Voltage, Transient 100 mS max. duration 50
Vdc
Isolation Voltage Input to output 1600
Vdc
On/Off Remote Control Power on, referred to -Vin
0
15
Vdc
Output Power 1.485 15.15
W
Output Current
Current-limited, no damage, short-circuit
protected
0.05
0.5
A
Storage Temperature Range Vin = Zero (no power)
-55
125 ˚C
Absolute maximums are stress ratings. Exposure of devices to greater than any of these conditions may adversely affect long-term reliability. Proper operation under conditions other than those
listed in the Performance/Functional Specifi cations Table is not implied or recommended.
INPUT
Operating Voltage Range 92436
Vdc
Recommended External Fuse Fast blow 4
A
Start-up Threshold Rising input voltage 8 8.5 9
Vdc
Undervoltage Shutdown (50% load) Falling input voltage 7.7 8.2 8.7
Vdc
Internal Filter Type C
Input Current
Full Load Input Current Vin = nominal 74 0.77
A
Low Line Input Current Vin = minimum 1.96 2.03
A
Inrush Transient 0.05 A2-Sec.
Short Circuit Input Current 0.05 0.1
A
No Load Input Current Iout = minimum, unit=ON 100 130
mA
Shut-Down Input Current (Off, UV, OT) 12
mA
Refl ected (Back) Ripple Current ➁
Measured at input with specifi ed fi lter 10
mA, p-p
GENERAL and SAFETY
Effi ciency
Vin = 24V, full load 82.5
84.5
%
Vin = min., full load 83.0
85.0
%
Isolation
Isolation Voltage Input to output
1600
Vdc
Isolation Resistance 10
M
Isolation Capacitance 1000 pF
Safety
Certifi ed to UL-60950-1, CSA-C22.2 No.
60950-1, IEC/60950-1, 2nd edition, with AM1
Approved
Calculated MTBF
Per Telcordia SR332, issue 1, class 3, ground
fi xed, Tambient = +25°C
6.7
Hours x 10
6
DYNAMIC CHARACTERISTICS
Fixed Switching Frequency 300 330 360
KHz
Startup Time Power on to Vout regulated 50
mS
Startup Time Remote ON to Vout regulated 50
mS
Dynamic Load Response
50-75-50% load step, settling time to within
1% of Vout
250 300
µSec
Dynamic Load Peak Deviation same as above ±100 ±200
mV
FEATURES and OPTIONS
Remote On/Off Control ➂
“N” suffi x
Negative Logic, ON state ON = Ground pin
-0.7
0.8
V
Negative Logic, OFF state OFF = Pin open
10
15
V
Control Current Open collector/drain 1 mA
“P” suffi x
Positive Logic, ON state ON = Pin open
10
15
V
Positive Logic, OFF state OFF = Ground pin
-0.7
0.8
V
Control Current Open collector/drain 1 mA
BPM15 Series
Encapsulated Isolated Wide Input Bipolar 15-Watt DC-DC Converters
MDC_BPM15.A02 Page 12 of 29
www.murata-ps.com/support
FUNCTIONAL SPECIFICATIONS, BPM15-150-Q12 (CONT.)
OUTPUT
Conditions ➀ ➂
Minimum Typical/Nominal Maximum Units
Total Output Power 1.485 15.00 15.15
W
Voltage
Nominal Output Voltage No trim 14.850 15.00 15.150
Vdc
Setting Accuracy At 50% load, no trim 1
% of Vnom
Overvoltage Protection Via magnetic feedback 16.8 18 20.5
Vdc
Current
Output Current Range ±0.05 ±0.5 ±0.5
A
Current Limit Inception 98% of Vnom., after warmup ±0.7 ±0.95 ±1.2
A
Short Circuit
Short Circuit Current
Hiccup technique, autorecovery within
±1.25% of Vout
0.3
A
Short Circuit Duration (remove short
for recovery)
Output shorted to ground, no damage Continuous
Short circuit protection method Current limiting
Regulation
Line Regulation Vin = min. to max., Vout = nom., Iout = nom. ±0.05 ±0.25
% of Vout
Load Regulation Iout = min. to max., Vin = 24V ±0.05 ±0.25
% of Vout
Ripple and Noise
5 Hz- 20 MHz BW, Vin=24V 60 100
mV pk-pk
Maximum Capacitive Loading
Low ESR, 0.02 ohms max 520
F
MECHANICAL
Outline Dimensions 1 x 1 x 0.40 Inches
(Please refer to outline drawing) W x L x H 25.4 x 25.4 x 10.16 mm
Weight 0.69 Ounces
19.56 Grams
Through Hole Pin Diameter 0.04 Inches
1.016 mm
Through Hole Pin Material Copper alloy
TH Pin Plating Metal and Thickness Nickel subplate 50 µ-inches
Gold overplate 5 µ-inches
ENVIRONMENTAL
Operating Ambient Temperature Range See derating
-40
85
°C
Operating Case Temperature Range No derating
-40
91
°C
Case Material Tin plated steel with black powder coat
Storage Temperature Vin = Zero (no power)
-55
125
°C
Thermal Protection/Shutdown Measured in center 120 130 140
°C
Electromagnetic Interference External fi lter is required
Conducted, EN55022/CISPR22 B Class
RoHS rating RoHS-6
Notes
➀ Unless otherwise noted, all specifi cations are at nominal input voltage, nominal output voltage and
full load. General conditions are +25˚ Celsius ambient temperature, near sea level altitude, natural
convection airfl ow. All models are tested and specifi ed with external parallel 1 µF and 10 µF output
capacitors. The external input capacitor is 100 F.
➁ Input (back) ripple current is tested and specifi ed over 5 Hz to 20 MHz bandwidth. Input fi ltering is
Cbus = 220 µF, Cin = 33 µF and Lbus = 12 µH.
➂ The Remote On/Off Control is referred to -Vin.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P29

BPM15-050-Q48N-C

Mfr. #:
Buy BPM15-050-Q48N-C
Manufacturer:
Description:
DC DC CONVERTER +/-5V 15W
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet