6 Solid State Pressure Sensors D8M
■ D8M-R1
Precautions
Be sure to abide by the following precautions for the safe operation of
the Sensor.
■ Soldering
Solder D8M-A1 on PC boards within 5 seconds using a soldering
iron whose tip temperature is adjusted to 345° to 355°C.
■ Mounting
For proper operation, mount the sensor within ±10 degrees of level.
30 (1.18)
23 (0.91)
30
(1.18)
23
(0.91)
Two, 3.2 (0.13) dia.
TYPE NAME
17.7 (0.70)
10.1 (0.40)
5 (0.20) dia.
2 (0.08)
2 (0.08) dia.
4 (0.16) OD
LOT NUMBER
5 (0.20)
1.6 (0.06)
7 (0.28)
18.8 (0.74)
18.6 (0.73)
11.6
(0.46)
CONNECTOR
V
CC (Pin 1)
F
OUT (Pin 2)
GND (Pin 3)
2 (0.08)
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, divide by 25.4
Cat. No. T026-E3-1
Printed in USA
OMRON CANADA, INC.
885 Milner Avenue
Toronto, Ontario M1B 5V8
416-286-6465
OMRON ELECTRONICS LLC
One East Commerce Drive
Schaumburg, IL 60173
1-800-55-OMRON
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.omron.com/oei
Canada - http://www.omron.com/oci
07/02/7.5M Specifications subject to change without notice
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, divide by 25.4
Cat. No. CS01WAD1
Printed in USA
OMRON CANADA, INC.
885 Milner Avenue
Toronto, Ontario M1B 5V8
416-286-6465
OMRON ELECTRONICS LLC
One East Commerce Drive
Schaumburg, IL 60173
847-882-2288
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.omron.com/oei
Canada - http://www.omron.com/oci
10/02 Specifications subject to change without notice
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.omron.com/oei
Canada - http://www.omron.ca
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, divide by 25.4
Cat. No. CS01WAD1(A)
Printed in USA
OMRON CANADA, INC.
885 Milner Avenue
Toronto, Ontario M1B 5V8
416-286-6465
OMRON ELECTRONICS LLC
One Commerce Drive
Schaumburg, IL 60173
847-882-2288
11/02 Specifications subject to change without notice
