PC457L0NIP
Series
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. PC457L)
2. Approved by VDE (VDE0884) (as an option), file No.
5911UG (as model No. PC457L)
3. Package resin : UL flammability grade (94V-0)
■ Features
■ Agency approvals/Compliance
1. Programmable controller
2. Inverter
■ Applications
High Speed 1Mb/s, High CMR
Mini-flat Package
∗
OPIC Photocoupler
1. Mini-flat 5 pin package
2. Double transfer mold package
(Ideal for Flow Soldering)
3. High speed response
(t
PHL
:
TYP.
0.2
µs,
t
PLH
:
TYP.
0.4
µs)
4. High noise immunity due to high instantaneous com-
mon mode rejection voltage (CM
H
: MIN. 15kV/µs,
CM
L
: MIN. −15kV/µs)
5. High isolation voltage between input and output
(V
iso(rms)
: 3.75 kV)
■ Description
PC457L0NIP Series contains a LED optically cou-
pled to an OPIC chip.
It is packaged in a 5 pin Mini-flat.
Input-output isolation voltage(rms) is 3.75 kV.
High speed response (TYP. 1Mb/s) and CMR is
MIN. 15 kV/µs.
1
Sheet No.: D2-A05101EN
Date Nov. 28. 2003
© SHARP Corporation
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
PC457L0NIP Series
∗
"OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-processing
circuit integrated onto a single chip.
