MDF76 Series●1.0 mm Pitch, Board-to-Wire LCD Interface Connectors
2
■Material
Plug
Receptacle
Insulator
Ground plate
Crimp contact
Part
Insulator
Contacts
Ground contact
Shell
Polyamide
Stainless steel
Phosphor bronze
Material
Polyamide or LCP (Note 4)
Phosphor bronze
Stainless steel
Color: Beige
Tin plated
Gold plated
Finish
Color: Beige or black (Note 5)
Gold plated
Tin plated
Tin plated or gold plated (Note 6)
UL94V-0
-------
-------
Remarks
UL94V-0
-------
-------
UL94V-0
Part Material Finish Remarks
Note 4: Low profile receptacles MDF76KBW and MDF76LBRW are polyamide.
High profile receptacles MDF76TW, MDF76URW, and MDF76GW are LCP.
Note 5: Low profile receptacles MDF76KBW, MDF76TW, and MDF76GW are beige.
Reverse mounting MDF76LBRW and MDF76URW are black.
Note 6: Low profile receptacles MDF76KBW and MDF76LBRW have tin plating on the solder leads.
High profile receptacles MDF76TW, MDF76URW and MDF76GW have gold plating on the solder leads.
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
4. Durability
5. Vibration
6. Shock
7. Humidity
8. Temperature cycle
9. Resistance to
soldering heat
■Specifications
-40ç to +85ç (Note 2)
RH 20% to 80%
-10ç to +60ç (Note 3)
RH 40% to 70% (Note 3)
Ratings
Voltage rating
Current rating
(Note 1)
Wire size
AWG 28 to 30: 1.0 A
AWG 32: 0.8 A
AWG 36: 0.5 A
Operating temperature range
Operating humidity range
Storage temperature range
Storage humidity range
200 V AC
Note 1: The current rating will differ depending on the wire size used.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for a long period prior to mounting and use.
The operating temperature and humidity range covers the non-conducting condition of connectors after board mounting and the
temporary storage conditions of transportation, etc.
100 V DC
500 V AC / 1 minute
20 mV max., at 1 mA.
50 cycles
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
10 cycles in each of the 3 axial directions
Acceleration of 490 m/s
2
, 11 ms duration, sine half-wave, 3
cycles in each of the 3 axis
96 hours at 60 ±2ç, and humidity of 90% to 95%
-55ç → 5 to 35ç → 85ç → 5 to 35ç
Times: 30 min.→ 2 min. to 3 min. → 30 min. → 2min. to 3 min.
5 cycle
Reflow : At the recommended temperature profile
Manual soldering : 300ç for 3 seconds
100 Mø min.
No flashover or insulation breakdown
40 mø max.
Contact resistance: 80 mø max.
No deformation of components affecting performance.
No electrical discontinuity of 1 µs or longer
No damage, cracks or parts dislocation.
No electrical discontinuity of 1 µs or longer
No damage, cracks or parts dislocation.
Contact resistance: 80 mø max.,
Insulation resistance: 50 Mø min.
Contact resistance: 80 mø max.,
Insulation resistance: 50 Mø min.
No damage, cracks or parts dislocation.
No deformation of components affecting performance.
Item Specification Conditions
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.