MTA9ADF1G72PKIZ-2G6B1

DDR4 SDRAM VLP MiniRDIMM

MTA9ADF1G72PKIZ – 8GB

Features

• DDR4 functionality and operations supported as

defined in the component data sheet

• 288-pin, very low profile registered dual in-line mini

memory module (VLP MiniRDIMM)

• Fast data transfer rate: PC4-2666, PC4-3200

• 8GB (1 Gig x 72)

• Supports ECC error detection and correction

• Nominal and dynamic on-die termination (ODT) for

data, strobe, and mask signals

• Low-power auto self refresh (LPASR)

• Data bus inversion (DBI) for data bus

• On-die V

REFDQ

generation and calibration

• Single-rank

• On-board I

2

C temperature sensor with integrated

• Halogen-free

• Fly-by topology

• Terminated control, command, and address bus

Table 1: Key Timing Parameters

1

Table 1: Key Timing Parameters (Continued)

Table 2: Addressing

Table 3: Part Numbers and Timing Parameters – 8GB Modules

8GB (x72, ECC, SR) 288-Pin DDR4 VLP MiniRDIMM

2

Important Notes and Warnings

Micron Technology, Inc. ("Micron") reserves the right to make changes to information published in this document,

including without limitation specifications and product descriptions. This document supersedes and replaces all

information supplied prior to the publication hereof. You may not rely on any information set forth in this docu-

ment if you obtain the product described herein from any unauthorized distributor or other source not authorized

automotive-grade products in automotive applications. Customer/distributor shall ensure that the terms and con-

ditions of sale between customer/distributor and any customer of distributor/customer (1) state that Micron

products are not designed or intended for use in automotive applications unless specifically designated by Micron

as automotive-grade by their respective data sheets and (2) require such customer of distributor/customer to in-

demnify and hold Micron harmless against all claims, costs, damages, and expenses and reasonable attorneys'

fees arising out of, directly or indirectly, any claim of product liability, personal injury, death, or property damage

resulting from any use of non-automotive-grade products in automotive applications.

Critical Applications. Products are not authorized for use in applications in which failure of the Micron compo-

nent could result, directly or indirectly in death, personal injury, or severe property or environmental damage

("Critical Applications"). Customer must protect against death, personal injury, and severe property and environ-

cron or its subsidiaries, subcontractors, or affiliates were negligent in the design, manufacture, or warning of the

Micron product.

Customer Responsibility. Customers are responsible for the design, manufacture, and operation of their systems,

applications, and products using Micron products. ALL SEMICONDUCTOR PRODUCTS HAVE INHERENT FAIL-

URE RATES AND LIMITED USEFUL LIVES. IT IS THE CUSTOMER'S SOLE RESPONSIBILITY TO DETERMINE

WHETHER THE MICRON PRODUCT IS SUITABLE AND FIT FOR THE CUSTOMER'S SYSTEM, APPLICATION, OR

PRODUCT. Customers must ensure that adequate design, manufacturing, and operating safeguards are included

in customer's applications and products to eliminate the risk that personal injury, death, or severe property or en-

vironmental damages will result from failure of any semiconductor component.

Limited Warranty. In no event shall Micron be liable for any indirect, incidental, punitive, special or consequential

8GB (x72, ECC, SR) 288-Pin DDR4 VLP MiniRDIMM

3