TP 04M, TP 06M, TP 06S, TP 07T
7313_en_03 PHOENIX CONTACT 9
6.3 Setup Main operating mode
Press the Press For Setup Main Menu button during the
startup phase to start the Setup Main operating mode.
.
Figure 5 Update, Registry
Update, Copy USB Stick, Copy to Flash:
Copies the data from the USB stick to the internal flash file
system. The root, backup or any other directory can be
selected.
Update, Copy USB Stick, Copy to USB:
Copies the contents of the flash file system to the backup
directory of the USB stick. Protected system files are
excluded. A log file is also copied, which can be used to
restore system settings via the "Import Settings" menu item.
Update, Copy USB Stick, Import Settings:
An automatically generated log file can be used to restore
system settings. If the backup directory of the USB stick
contains a corresponding log file, the settings can be
restored.
This is only possible when using identical types of device.
Update, Update Image:
If the image subdirectory of the memory stick contains an
"xxxx.nb0" file, then this file is used to perform the image
update. There must only be one "xxxx.nb0" file in this
directory.
During this procedure flash registry is deactivated. This
means that "image" is operated with a new default registry.
Update
Touch Screen
& Registry
Network
S e ttin g s
OPC ResEdit
Copy USB
Stick
U pdate Im age
U pdate
B ootloader
Hom e
Save Registry
Settings
Hom e
Setup M ain
Update
Touch Screen & R egistry
S erver
5
m yserver.m yho st.lo cal
SNTP Settings
Interval [m in utes]
OK C an cel
C han g e D isp lay M ode
A
OK
C an cel
A
A
A
LC D S aver
Exit
S e ttin g s
Current M ode
C opy to Flash
Copy to USB
Im port
Settings
Hom e
Copy USB Stick
Change
D isplay M ode
Start
C a lib r a tio n
SN TP Settings
To transfer data and settings to another device,
proceed as follows:
1. "Copy to USB" on current device.
2. "Copy to Flash" on destination device.
3. Select "Backup" directory.
The device is restarted.
4. "Import Settings" on destination device.
Selection Function
Root All files (no directories) of the root
directory are copied to the root directory of
the flash memory.
Backup The contents of the directory are copied to
the root directory of the flash memory.
XYZ (any) The selected directory (including
subdirectories) is copied 1:1 to the flash
memory.