YV09T60 60A DC-DC POL Converter
5V to 13.8V Input
• 0.6V to 1.98V Output
Data Sheet
ZD-01724 Rev 3.4, 07-Nov-10 www.power-one.com Page 13 of 14
9. Pin Assignments and Description
Pin
Name
Pin
Number
Pin
Type
Buffer
Type
Pin Description Notes
Trim+ 1 I A Output Voltage Trim
Connect a high accuracy resistor between Trim+
and Trim- pins to set the output voltage
2 No Pin
PwrGood 4 I/O PU Power Good
Open drain pin indicating status of the output
Trim- 5 I/O A Output Voltage Trim
Connect a high accuracy resistor between Trim+
and Trim- pins to set the output voltage
NC 6 Not Used Leave floating
ON/OFF 9 I PU Enable Pull high or leave floating to turn ON the POL
Sense- 10 I A Negative Voltage Sense Connect to the negative point close to the load
Sense+ 11 I A Positive Voltage Sense Connect to the positive point close to the load
Vout
15, 16,
18, 20,
22,24
P Output Voltage
GND
3, 7, 8,
17, 19,
21, 23
P Power Ground
Vin
12, 13,
14
P Input Voltage
Legend: I=input, O=output, I/O=input/output, P=power, A=analog, PU=internal pull-up
