OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

JN5139-Z01-M/01R1V

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27
This device has been designed to operate with the antennas listed above. Antennas not included in this list or having
a gain greater than 18 dBi are strictly prohibited for use with this device. The required antenna impedance is 50ohms.
A.6.2 High Power Module usage limitation
must notThe high power module variants are classified as ‘mobile’ device pursuant with FCC § 2.1091 and be used
at a distance of < 20 cm (8”) from any nearby people.
IMPORTANT NOTE: In the event that these conditions can not be met (for certain configurations or co-location with
another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the
final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this
RF module in the user manual of the end product.
The user manual for the end product must include the following information in a prominent location;
“To comply with FCC’s RF radiation exposure requirements, the antenna(s) used for this transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter.”
A.6.3 FCC End Product Labelling
The final ‘end product’ should be labelled in a visible area with the following:
“Contains TX FCC ID: TYOJN5139M0, TYOJN5139M3 or TYOJN5139M4 ” to reflect the version of the module being
used inside the product.
22 JN-DS-JN5139-xxx-Myy 1v6 © NXP Laboratories UK 2010
A.7 European R & TTE Directive 1999/5/EC Statement
All modules listed in this datasheet are compliant with ETSI EN 300 328V1.7.1 (2006/05) and are subject to Notified
Body Opinion RU1548/9025 Issue 2.
The modules are approved for use with the antennas listed in the following table. The high power modules M02 and
M04 are limited to an antenna with a gain of 2.2 dBi or less.
Brand Model Number Description Gain Connector type
Antenna Factor ANT-2.4-CW-RCL Vertical - knuckle antenna 2.9dBi RP-SMA
Antenna Factor ANT-2.4-CW-RCT-SS Vertical - knuckle antenna 2.2dBi SMA
Laird Technologies WCR2400-SMA Vertical - knuckle antenna 1.0dBi SMA
Laird Technologies WRR2400-IP04 Vertical - knuckle-flying lead 1.5dBi uFL
Embedded Antenna Design BKR2400 Vertical - knuckle antenna 2.0dBi SMA
Antennova Titanis Vertical - knuckle antenna 4.4dBi SMA
Nearson S131CL-L-PX-2450S Vertical - knuckle-flying lead 2.0dBi uFL
Nearson S152CL-L-PX-2450S Vertical - knuckle-flying lead 4.0dBi uFL
Aveslink Technology, Inc E-0030-AA Patch Antenna - flying lead 4dBi uFL
Aveslink Technology, Inc E-0030-AB Patch Antenna - flying lead 4dBi SMA
Aveslink Technology, Inc E-1204-AB Ceiling antenna - flying lead 4dBi SMA
Aveslink Technology, Inc E-0005-AB Vertical- flying lead 2dBi SMA
Aveslink Technology, Inc E-1450-GB Vertical-swivel mount 4dBi SMA
Aveslink Technology, Inc E-1450-GC Vertical-swivel mount 4dBi RP-SMA
Aveslink Technology, Inc E-1520-CA Vertical - bulkhead- flying lead 4dBi uFL
Aveslink Technology, Inc E-1520-GB Vertical - swivel 4dBi SMA
Aveslink Technology, Inc E-1520-GC Vertical - swivel 4dBi RP-SMA
Aveslink Technology, Inc E-2411-GB Vertical - swivel 2dBi SMA
Aveslink Technology, Inc E-2410-CA Vertical - bulkhead- flying lead 2dBi uFL
Aveslink Technology, Inc E-2410-GB Vertical - swivel 2dBi SMA
Aveslink Technology, Inc E-2410-GC Vertical - swivel 2dBi RP-SMA
Aveslink Technology, Inc E-2410-HA Vertical - swivel -flying lead 2dBi uFL
Aveslink Technology, Inc E-2820-CA Vertical - bulkhead- flying lead 2dBi uFL
Aveslink Technology, Inc E-2820-GB Vertical - swivel 2dBi SMA
Aveslink Technology, Inc E-2820-GC Vertical - swivel 2dBi RP-SMA
Aveslink Technology, Inc E-6170-DA Vertical - right angle 1dBi uFL
Aveslink Technology, Inc E-0901-AA Embedded - flying lead 2.5dBi uFL
Hyperlink Technologies HG2402RD-RSF Vertical – tilt and swivel 2.2dBi RP-SMA
© NXP Laboratories UK 2010 JN-DS-JN5139-xxx-Myy 1v6 23
A.8 Industry Canada Statement
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
These modules have been designed to operate with antennas having a maximum gain of 4.4 dBi. Antennas having a
gain greater than 4.4 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
The following table shows the approved list of antennas:
Brand Model Number Description Gain
Antenna Factor ANT-2.4-CW-RCL Knuckle Antenna 2.9 dBi
Antenna Factor ANT-2.4-CW-RCT-RP Knuckle Antenna 2.2 dBi
Centurion WCR2400-SMRP Knuckle Antenna 1.0 dBi
Centurion WRR2400-SMRP Knuckle Antenna 1.3 dBi
Nearson S131CL-L-PX-2450S Knuckle Antenna 2.0 dBi
Nearson S141AH-2450 Knuckle Antenna 2.0 dBi
Nearson S152CL-L-PX-2450S Knuckle Antenna 4.0 dBi
Hyperlink Technologies HG2402RD-RSF Knuckle Antenna 2.2 dBi
As long as the above condition is met, further transmitter testing will not be required. However, the OEM integrator is
still responsible for testing their end-product for any additional compliance requirements required with this module
installed (for example, digital device emissions, PC peripheral requirements, etc).
A.8.1 Industry Canada End Product Labelling
For Industry Canada purposes the following should be used.
“Contains Industry Canada ID IC: 7438A-CYO5139M0, IC: 7438A-CYO5139M4 or IC: 7438A-CYO5139M6” to reflect
the version of the module being used inside the product.
A.9 RoHS Compliance
JN5139-xxx-Myy devices meet the requirements of Directive 2002/95/EC of the European Parliament and of the
Council on the Restriction of Hazardous Substance (RoHS).
The JN5139-xxx-M00, M03 and M04 modules are fully compliant with the Chinese RoHS requirements SJ/T11363-
2006.
Further information can be found at
www.nxp.com/jennic.
24 JN-DS-JN5139-xxx-Myy 1v6 © NXP Laboratories UK 2010
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27

JN5139-Z01-M/01R1V

Mfr. #:
Buy JN5139-Z01-M/01R1V
Manufacturer:
NXP Semiconductors
Description:
Zigbee Modules (802.15.4) WIRELESS MCU ZIGBEE
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet