OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

WM8521CH9GED/R

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21
WM8521 Production Data
w
PD, Rev 4.2, February 2013
4
PIN DESCRIPTION
PIN NAME TYPE DESCRIPTION
1
DGND Supply Digital Negative supply
2
LRCLK Digital input Sample rate clock input
3
DIN Digital input Serial audio data input
4
BCLK Digital input Bit clock input
5
MUTE Digital input Soft mute control, Internal pull down
High Impedance = Automute
High = Mute ON
Low = Mute OFF
6
VOUTR Analogue output Right channel DAC output
7
AGND Supply Analogue Negative supply
8
CAP Analogue output Analogue internal reference
9
AVDD Supply Analogue Positive supply
10
VOUTL Analogue output Left channel DAC output
11
DEEMPH Digital input De-emphasis select, Internal pull down
High = de-emphasis ON
Low = de-emphasis OFF
12
FORMAT Digital input Data input format select, Internal pull up
Low = 16-bit right justified or 16bit DSP Mode A
High = 16-32-bit I
2
S or 16bit DSP Mode B
13
MCLK Digital input Master clock input
14
DVDD Supply Digital Positive supply
Note:
1. Digital input pins have Schmitt trigger input buffers.
Production Data WM8521
w
PD, Rev 4.2, February 2013
5
ABSOLUTE MAXIMUM RATINGS
Absolute Maximum Ratings are stress ratings only. Permanent damage to the device may be caused by continuously operating at
or beyond these limits. Device functional operating limits and guaranteed performance specifications are given under Electrical
Characteristics at the test conditions specified.
ESD Sensitive Device. This device is manufactured on a CMOS process. It is therefore generically susceptible
to damage from excessive static voltages. Proper ESD precautions must be taken during handling and storage
of this device.
Wolfson tests its package types according to IPC/JEDEC J-STD-020 for Moisture Sensitivity to determine acceptable storage
conditions prior to surface mount assembly. These levels are:
MSL1 = unlimited floor life at <30
C / 85% Relative Humidity. Not normally stored in moisture barrier bag.
MSL2 = out of bag storage for 1 year at <30
C / 60% Relative Humidity. Supplied in moisture barrier bag.
MSL3 = out of bag storage for 168 hours at <30
C / 60% Relative Humidity. Supplied in moisture barrier bag.
The Moisture Sensitivity Level for each package type is specified in Ordering Information.
Supplies are independent and can be applied in either order without damage to device.
CONDITION MIN MAX
Analogue Supply Voltage (AVDD)
-0.3V +15V
Digital Supply voltage (DVDD)
-0.3V +4.2V
Voltage range digital inputs
DGND -0.3V DVDD +0.3V
Master Clock Frequency
50MHz
Operating temperature range, T
A
-25 C +85 C
Storage temperature prior to soldering
30
C max / 85% RH max
Storage temperature after soldering
-65
C +150 C
WM8521 Production Data
w
PD, Rev 4.2, February 2013
6
DC ELECTRICAL CHARACTERISTICS
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
WM8521HC Analogue
supply range
AVDD 7.6 12 13.2 V
WM8521H9 Analogue
supply range
AVDD 7.6 9 13.2 V
Digital supply range
DVDD 2.7 3.3 3.6 V
Ground
AGND / DGND 0 V
WM8521HC Supply current
I
AVDD
AVDD = 12V 28.0 mA
I
DVDD
DVDD = 3.3V 4.0
WM8521H9 Supply current
I
AVDD
AVDD = 9V 25.0 mA
I
DVDD
DVDD = 3.3V 4.0
WM8521HC Power down
current (note 4)
I
AVDD
AVDD = 12V 22.8 mA
I
DVDD
DVDD = 3.3V 0.014
WM8521H9 Power down
current (note 4)
I
AVDD
AVDD = 9V 17.1 mA
I
DVDD
DVDD = 3.3V 0.014
Note:
1. AVDD and DVDD are fully independent and can be applied in any order without damage to the device.
ELECTRICAL CHARACTERISTICS
Test Conditions
WM8521HC: AVDD = 12V, DVDD = 3.3V, AGND / DGND = 0V, T
A
= +25
o
C, fs = 48kHz, MCLK = 256fs unless otherwise stated.
WM8521H9: AVDD = 9V, DVDD = 3.3V, AGND / DGND = 0V, T
A
= +25
o
C, fs = 48kHz, MCLK = 256fs unless otherwise stated.
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
Digital Logic Levels (CMOS Levels)
Input LOW level V
IL
0.3 x DVDD V
Input HIGH level V
IH
0.7 x DVDD V
Output LOW V
OL
I
OL
= 1mA 0.1 x DVDD V
Output HIGH V
OH
I
OH
= -1mA 0.9 x DVDD V
Analogue Reference Levels
Reference voltage (CAP)
AVDD/2 V
Potential divider resistance R
CAP
VDD to CAP and CAP
to GND
50 k
WM8521HC DAC Output (Load = 10k . 50pF)
0dBFs Full scale output voltage
At DAC outputs 1.9 2.0 2.1 V
rms
SNR (Terminology Note 1,2,3)
A-weighted,
@ fs = 48kHz
91 98 dB
SNR (Terminology Note 1,2,3)
A-weighted
@ fs = 96kHz
98 dB
SNR (Terminology Note 1,2,3)
N
on A weighted @ fs =
48kHz
95 dB
THD (Note 3)
1kHz, 0dBFs -81 dB
Dynamic Range (Note 2)
1kHz, THD+N @
-60dBFs
91 98 dB
DAC Channel Separation
1kHz, 0dBFs 93 dB
Power Supply Rejection Ratio
PSRR 1kHz 100mVpp 46 dB
WM8521H9 DAC Output (Load = 10k . 50pF)
0dBFs Full scale output voltage
At DAC outputs 1.9 2.0 2.1 V
rms
SNR (Terminology Note 1,2,3)
A-weighted,
@ fs = 48kHz
91 96 dB
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21

WM8521CH9GED/R

Mfr. #:
Buy WM8521CH9GED/R
Manufacturer:
Cirrus Logic
Description:
Audio D/A Converter ICs Stereo DAC, 2Vrms
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet