IS62LV256 ISSI
®
Integrated Silicon Solution, Inc. — www.issi.com —
1-800-379-4774
1
Rev. K
12/11/02
Copyright © 2002 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time
without notice. ISSI assumes no liability arising out of the application or use of any information, products or services described herein. Customers are advised to
obtain the latest version of this device specification before relying on any published information and before placing orders for products.
FEATURES
• Access time: 45, 70 ns
• Low active power: 70 mW
• Low standby power
— 45 µW CMOS standby
• Fully static operation: no clock or refresh
required
• TTL compatible inputs and outputs
• Single 3.3V power supply
DESCRIPTION
The ISSI IS62LV256 is a very high-speed, low power,
32,768-word by 8-bit static RAM. It is fabricated using ISSI's
high-performance CMOS double-metal technology.
When CE is HIGH (deselected), the device assumes a
standby mode at which the power dissipation is reduced to
10 µW (typical) with CMOS input levels.
Easy memory expansion is provided by using an active LOW
Chip Enable (CE) input and an active LOW Output Enable
(OE) input. The active LOW Write Enable (WE) controls both
writing and reading of the memory.
The IS62LV256 is pin compatible with other 32K x 8 SRAMs
in 300-mil SOJ, 330-mil plastic SOP, and TSOP (Type I Normal
and Reverse Bent) packages.
32K x 8 LOW VOLTAGE STATIC RAM
FUNCTIONAL BLOCK DIAGRAM
A0-A14
CE
OE
WE
256 X 1024
MEMORY ARRAY
DECODER
COLUMN I/O
CONTROL
CIRCUIT
GND
VCC
I/O
DATA
CIRCUIT
I/O0-I/O7
DECEMBER 2002
