ICS-52000
Low-Noise Microphone with TDM Digital Output
InvenSense reserves the right to change the detail
specifications as may be required to permit improvements
in the design of its products.
InvenSense Inc.
1745 Technology Drive, San Jose, CA 95110 U.S.A
+1(408) 9887339
www.invensense.com
Document Number: DS-000121
Revision: 1.3
Release Date: 4/14/2017
GENERAL DESCRIPTION
The ICS-52000 is a digital TDM output bottom port microphone.
The complete ICS-52000 solution consists of a MEMS sensor, signal
conditioning, an analog-to-digital converter, decimation and anti-
aliasing filters, power management, and an industry standard 24-
bit TDM interface. The TDM interface allows an array of up to 16 of
the ICS-52000 microphones to connect directly to digital
processors, such as DSPs and microcontrollers, without the need
for an audio codec in the system. All microphones in an array
sample their acoustic signals synchronously, enabling precise array
processing.
The ICS-52000 has a high SNR of 65 dBA and a wideband frequency
response. The sensitivity tolerance of the ICS-52000 is ±1 dB,
which enables high-performance microphone arrays without
the need for system calibration.
The ICS-52000 is available in a small 4 mm × 3 mm × 1 mm
surface-mount package.
APPLICATIONS
Speech Recognition Arrays
Smart Televisions
Teleconferencing Systems
Gaming Consoles
Security Systems
Microphone Arrays
FEATURES
Digital TDM Interface with High Precision 24-bit Data
Supports TDM arrays of up to 16 synchronously-
sampled channels
High 65 dBA SNR
−26 dB FS Sensitivity
±1 dB Sensitivity Tolerance
Wide Frequency Response from 50 Hz to 20 kHz
Low Current Consumption: 1.0 mA
High Power Supply Rejection: 89 dB FS
117 dB SPL Acoustic Overload Point
Small 4 mm × 3 mm × 1 mm Surface-Mount Package
Compatible with Sn/Pb and Pb-Free Solder Processes
RoHS/WEEE Compliant
FUNCTIONAL BLOCK DIAGRAM
ORDERING INFORMATION
PART
TEMP RANGE
PACKAGING
ICS-52000
−40°C to +85°C
13” Tape & Reel
EV_ICS-52000-FX
ICS-52000
ADC
FILTER
HARDWARE
CONTROL
SERIAL
PORT
POWER
MANAGEMENT
SCK
SD
WS
VDD
GND
CONFIG
TDM
WSO
ICS-52000
Page 2 of 20
Document Number: DS-000121
Revision: 1.3
TABLE OF CONTENTS
General Description ..................................................................................................................................................................... 1
Applications ................................................................................................................................................................................. 1
Features ....................................................................................................................................................................................... 1
Functional Block Diagram ............................................................................................................................................................ 1
Ordering Information ................................................................................................................................................................... 1
Table of Contents .................................................................................................................................................................................... 2
Specifications .......................................................................................................................................................................................... 4
Table 1. Electrical Characteristics ................................................................................................................................................ 4
Table 2. TDM Digital INPUT/Output ............................................................................................................................................ 5
Table 3. Serial Data Port Timing Specification ............................................................................................................................. 5
Timing Diagram ............................................................................................................................................................................ 5
Absolute Maximum Ratings .................................................................................................................................................................... 6
Table 4. Absolute Maximum Ratings ........................................................................................................................................... 6
ESD Caution ................................................................................................................................................................................. 6
Soldering Profile........................................................................................................................................................................... 7
Table 5. Recommended Soldering Profile .................................................................................................................................... 7
Pin Configurations And Function Descriptions ....................................................................................................................................... 8
Table 6. Pin Function Descriptions ............................................................................................................................................... 8
Typical Performance Characteristics ....................................................................................................................................................... 9
Theory of Operation ............................................................................................................................................................................. 10
Startup and Power Management .............................................................................................................................................. 10
Startup ............................................................................................................................................................................ 10
Table 7. Startup time ...................................................................................................................................................... 10
Standby Mode ................................................................................................................................................................ 10
Soft Unmute ................................................................................................................................................................... 10
Synchronizing Microphones ...................................................................................................................................................... 11
TDM Data Interface ................................................................................................................................................................... 11
Data Output Format ....................................................................................................................................................... 11
Digital Microphone Sensitivity ................................................................................................................................................... 13
Digital Filter Characteristics ....................................................................................................................................................... 13
High-Pass Filter ............................................................................................................................................................... 13
Low-Pass Decimation Filter ............................................................................................................................................ 13
Applications Information ...................................................................................................................................................................... 14
SD Output Drive Strength .......................................................................................................................................................... 14
Design Recommendations .............................................................................................................................................. 14
Power Supply Decoupling .......................................................................................................................................................... 14
Supporting Documents ......................................................................................................................................................................... 15
ICS-52000
Page 3 of 20
Document Number: DS-000121
Revision: 1.3
Evaluation Board User Guide ..................................................................................................................................................... 15
Application Notes ...................................................................................................................................................................... 15
PCB Design And Land Pattern Layout ................................................................................................................................................... 16
PCB Material And Thickness ...................................................................................................................................................... 16
Handling Instructions ............................................................................................................................................................................ 17
Pick And Place Equipment ......................................................................................................................................................... 17
Reflow Solder ............................................................................................................................................................................. 17
Board Wash................................................................................................................................................................................ 17
Outline Dimensions ............................................................................................................................................................................... 18
Ordering Guide .......................................................................................................................................................................... 18
Revision History ......................................................................................................................................................................... 19
Compliance Declaration Disclaimer ...................................................................................................................................................... 20

ICS-52000

Mfr. #:
Manufacturer:
TDK InvenSense
Description:
MEMS Microphones Low-Noise Microphone with TDM Digital Output
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet