ICS-43432
Low-Noise Microphone with I
2
S Digital Output
GENERAL DESCRIPTION
The ICS-43432* is a digital I
2
S output bottom port microphone.
The complete ICS-43432 solution consists of a MEMS sensor,
signal conditioning, an analog-to-digital converter, decimation
and anti-aliasing filters, power management, and an industry
standard 24-bit I²S interface. The I²S interface allows the
ICS-43432 to connect directly to digital processors, such as DSPs
and microcontrollers, without the need for an audio codec in the
system.
The ICS-43432 has a high SNR of 65 dBA and a wideband
frequency response. The sensitivity tolerance of the ICS-43432
is ±1 dB, which enables high-performance microphone arrays
without the need for system calibration.
The ICS-43432 is available in a small 4 mm × 3 mm × 1 mm
surface-mount package.
*Protected by U.S. Patents 7,449,356; 7,825,484; 7,885,423; and 7,961,897.
Other patents are pending.
APPLICATIONS
Wearables
Smart Televisions
Remote Controls
Teleconferencing Systems
Gaming Consoles
Security Systems
Microphone Arrays
FEATURES
Digital I²S Interface with High Precision 24-bit Data
High 65 dBA SNR
−26 dB FS Sensitivity
±1 dB Sensitivity Tolerance
Wide Frequency Response from 50 Hz to 20 kHz
Low Current Consumption: 1.0 mA
High Power Supply Rejection: 80 dB FS
116 dB SPL Acoustic Overload Point
Small 4 mm × 3 mm × 1 mm Surface-Mount Package
Compatible with Sn/Pb and Pb-Free Solder Processes
RoHS/WEEE Compliant
FUNCTIONAL BLOCK DIAGRAM
ORDERING INFORMATION
PART
TEMP RANGE
PACKAGING
ICS-43432
−40°C to +85°C
13” Tape & Reel
EV_ICS-43432-FX
ICS-43432
ADC
FILTER
HARDWARE
CONTROL
I
2
S
SERIAL
PORT
POWER
MANAGEMENT
SCK
SD
WS
VDD
GND
CONFIG
LR
This document contains information on a preproduction
product. Specifications and information herein are subject
to change without notice.
InvenSense Inc.
1745 Technology Drive, San Jose, CA 94089 U.S.A
+1(408) 9887339
www.invensense.com
Document Number: DS-000038
Revision: 1.0
Release Date: 12/10/2014
ICS-43432
TABLE OF CONTENTS
General Description ..................................................................................................................................................................... 1
Applications ................................................................................................................................................................................. 1
Features ....................................................................................................................................................................................... 1
Functional Block Diagram ............................................................................................................................................................ 1
Ordering Information ................................................................................................................................................................... 1
Table of Contents .................................................................................................................................................................................... 2
Specifications .......................................................................................................................................................................................... 4
Table 1. Electrical Characteristics ................................................................................................................................................ 4
Table 2. I²S Digital INPUT/Output ................................................................................................................................................ 5
Table 3. Serial Data Port Timing Specification ............................................................................................................................. 5
Timing Diagram ............................................................................................................................................................................ 5
Absolute Maximum Ratings .................................................................................................................................................................... 6
Table 4. Absolute Maximum Ratings ........................................................................................................................................... 6
ESD Caution ................................................................................................................................................................................. 6
Soldering Profile........................................................................................................................................................................... 7
Table 5. Recommended Soldering Profile .................................................................................................................................... 7
Pin Configurations And Function Descriptions ....................................................................................................................................... 8
Table 6. Pin Function Descriptions ............................................................................................................................................... 8
Typical Performance Characteristics ....................................................................................................................................................... 9
Theory of Operation ............................................................................................................................................................................. 10
Power Management .................................................................................................................................................................. 10
Startup and Normal Operation ....................................................................................................................................... 10
Table 7. Startup time ...................................................................................................................................................... 10
Standby Mode ................................................................................................................................................................ 10
Soft Unmute ................................................................................................................................................................... 10
Synchronizing Microphones ...................................................................................................................................................... 10
I²S Data Interface ....................................................................................................................................................................... 10
Data Output Mode ......................................................................................................................................................... 10
Data Word Length .......................................................................................................................................................... 11
Data Word Format .......................................................................................................................................................... 11
Data Output Format ....................................................................................................................................................... 12
Digital Microphone Sensitivity ................................................................................................................................................... 12
Digital Filter Characteristics ....................................................................................................................................................... 12
High-Pass Filter ............................................................................................................................................................... 12
Low-Pass Decimation Filter ............................................................................................................................................ 13
Applications Information ...................................................................................................................................................................... 14
SD Output Drive Strength .......................................................................................................................................................... 14
Page 2 of 20
Document Number: DS-000038
Revision: 1.0
ICS-43432
Power Supply Decoupling .......................................................................................................................................................... 14
Supporting Documents ......................................................................................................................................................................... 15
Evaluation Board User Guide ..................................................................................................................................................... 15
Application Notes ...................................................................................................................................................................... 15
PCB Design And Land Pattern Layout ................................................................................................................................................... 16
PCB Material And Thickness ...................................................................................................................................................... 16
Handling Instructions ............................................................................................................................................................................ 17
Pick And Place Equipment ......................................................................................................................................................... 17
Reflow Solder ............................................................................................................................................................................. 17
Board Wash................................................................................................................................................................................ 17
Outline Dimensions ............................................................................................................................................................................... 18
Ordering Guide .......................................................................................................................................................................... 18
Revision History ......................................................................................................................................................................... 19
Compliance Declaration Disclaimer ...................................................................................................................................................... 20
Page 3 of 20
Document Number: DS-000038
Revision: 1.0

ICS-43432

Mfr. #:
Manufacturer:
TDK InvenSense
Description:
MIC MEMS DIGITAL I2S OMNI -26DB
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet