PTFA211801F V4 R250

PTFA211801E
PTFA211801F
Data Sheet 10 of 11 Rev. 03, 2005-06-10
Package Outline Specifications (cont.)
Package 31260
Diagram Notes:
1. Lead thickness: 0.10 +0.051/–0.025 [.004 +.002/–.001].
2. All tolerances ± 0.127 [.005] unless specified otherwise.
3. Pins: D = drain, S = source, G = gate.
4. Interpret dimensions and tolerances per ASME Y14.5M-1994.
5. Primary dimensions are mm. Alternate dimensions are inches.
Find the latest and most complete information about products and packaging at the Infineon Internet page
http://www.infineon.com/products
260-cases_31260
SPH 1.57
[.062]
1.02
[.040]
23.37±0.51
[.920±.020]
2X 12.70
[.500]
45° X 2.031
[.080]
D
G
S
-A-
4.11±0.38
[.162±.015]
22.35±0.23
[.880±.009]
23.11
[.910]
13.72
[.540]
2x 4.83±0.50
[.190±.020]
[.520
+.004
]
–.006
.
LID 13.21
+0.10
–0.15
0.038 [.0015]
Data Sheet 11 of 11 Rev. 03, 2005-06-10
PTFA211801E/F
Confidential, Limited Internal
Revision History: 2005-06-10, Rev. 03 Data Sheet
Previous Version:
2005-05-02, Data Sheet
Page Subjects (major changes since last revision)
4 Add Power Sweep graph for 30 V
GOLDMOS
®
is a registered trademark of Infineon Technologies AG.
Edition 2005-06-10
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
81669 München, Germany
© Infineon Technologies AG 2005.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as a guarantee of
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon
Technologies Office (www.infineon.com/rfpower).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in question
please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of
Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support
device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are
intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it
is reasonable to assume that the health of the user or other persons may be endangered.
We Listen to Your Comments
Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to:
highpowerRF@infineon.com
To request other information, contact us at:
+1 877 465 3667 (1-877-GOLDMOS) USA
or +1 408 776 0600 International

PTFA211801F V4 R250

Mfr. #:
Manufacturer:
Infineon Technologies
Description:
RF MOSFET Transistors Hi Pwr RF LDMOS FET 180 W 2110-2170 MHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union