SL2S5002_SL2S5102 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet
COMPANY PUBLIC
Rev. 3.4 — 27 August 2012
193134 11 of 35
NXP Semiconductors
SL2S5002; SL2S5102
ICODE SLIX-L
9.2.2 Configuration of delivered ICs
ICODE SLIX-L ICs are delivered with the following configuration by NXP Semiconductors:
• Unique identifier is unique and read only
• Write access conditions allow change to user blocks, AFI, DSFID, EAS and
passwords
• All password bytes are 00h for the EAS/AFI password
• All password bytes are 0Fh for the Privacy and Destroy passwords
• Password protected Privacy Mode is disabled
• EAS and AFI password protection is disabled
• Status of EAS mode is not defined
• AFI is supported and not defined
• DSFID is supported and not defined
• User data memory is not defined
Remark: Because the EAS mode is undefined at delivery, the EAS mode shall be set
(enabled or disabled) according to your application requirements during the test or
initialization phase.
Remark: If password protection is not required, depending on the targeted application, it
is recommended to write random passwords during the label initialization.
9.3 Communication principle
For detailed description of the protocol and timing please refer to ISO/IEC 15693-2
(modulation, bit-coding, framing, Ref. 2
) and ISO/IEC 15693-3 (anticollision, timing,
protocol, Ref. 3
).
9.4 Supported commands
9.4.1 Mandatory commands
9.4.1.1 INVENTORY
As defined in ISO/IEC 15693-3.
Exception: If the Privacy or Destroy mode is enabled the label will not respond.
9.4.1.2 STAY QUIET
As defined in ISO/IEC 15693-3.
