CMOS, ±5 V/+5 V/+3 V, Triple SPDT Switch
Data Sheet
ADG633
Rev. B Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2003–2017 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
±2 V to ±6 V dual-supply operation
2 V to 12 V single-supply operation
Temperature range: −40°C to +125°C
<0.2 nA leakage currents
52 Ω on resistance over full signal range
Rail-to-rail switching operation
16-lead LFCSP and TSSOP packages
Typical power consumption: <0.1 μW
TTL-/CMOS-compatible inputs
Package upgrades to 74HC4053 and MAX4053/MAX4583
APPLICATIONS
Automatic test equipment
Data acquisition systems
Battery-powered systems
Communications systems
Audio and video signal routing
Relay replacement
Sample-and-hold systems
Industrial control systems
FUNCTIONAL BLOCK DIAGRAM
S1B
D1
S1A
S2A
D2
S2B
S3A
D3
S3B
A0 A1 A2 EN
LOGIC
ADG633
SWITCHES SHOWN FOR A LOGIC 1 INPUT.
3275-001
Figure 1.
GENERAL DESCRIPTION
The ADG633 is a low voltage CMOS device comprising three
independently selectable single-pole, double-throw (SPDT)
switches. The device is fully specified for ±5 V, +5 V, and +3 V
supplies. The ADG633 switches are turned on with a logic low
(or high) on the appropriate control input. Each switch conducts
equally well in both directions when on and has an input signal
range that extends to the supplies. An
EN
input is used to enable
or disable the device. When the device is disabled, all channels
are switched off.
The ADG633 is designed on an enhanced process that provides
lower power dissipation, yet is capable of high switching speeds.
Low power consumption and an operating supply range of 2 V
to 12 V make the ADG633 ideal for battery-powered, portable
instruments. All channels exhibit break-before-make switching
action, preventing momentary shorting when switching channels.
All digital inputs have 0.8 V to 2.4 V logic thresholds, ensuring
TTL/CMOS logic compatibility when using single +5 V or dual
±5 V supplies.
The ADG633 is available in a small, 16-lead TSSOP package
and a 16-lead, 4 mm × 4 mm LFCSP package.
PRODUCT HIGHLIGHTS
1. Single- and dual-supply operation. The ADG633 offers
high performance and is fully specified and guaranteed
with ±5 V, +5 V, and +3 V supply rails.
2. Temperature range: −40°C to +125°C.
3. Guaranteed break-before-make switching action.
4. Low power consumption, typically <0.1 μW.
5. Small, 16-lead TSSOP and 16-lead, 4 mm × 4 mm LFCSP
packages.