Nonreflective, Silicon SP4T Switch,
0.1 GHz to 6.0 GHz
Data Sheet
HMC7992
Rev. 0 Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2016 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
Nonreflective, 50 Ω design
High isolation: 45 dB typical at 2 GHz
Low insertion loss: 0.6 dB at 2 GHz
High power handling
33 dBm through path
27 dBm terminated path
High linearity
1 dB compression (P1dB): 35 dBm typical
Input third-order intercept (IIP3): 58 dBm typical
ESD rating: 2 kV human body model (HBM), Class 2
Single positive supply: 3.3 V to 5.0 V
Standard TTL-, CMOS-, and 1.8 V-compatible control
16-lead, 3 mm × 3 mm LFCSP package (9 mm
2
)
Pin compatible with the HMC241ALP3E
APPLICATIONS
Cellular/4G infrastructure
Wireless infrastructure
Automotive telematics
Mobile radios
Test equipment
FUNCTIONAL BLOCK DIAGRAM
GND RFC GND GND
GND V
DD
BA
RF1
GND
GND
RF2
RF4
GND
GND
RF3
16 15 14 13
11
10
2
3
5678
2:4 TTL DECODER
PACKAGE
BASE
GND
12
9
1
4
13714-001
HMC7992
Figure 1.
GENERAL DESCRIPTION
The HMC7992 is a general-purpose, nonreflective, 0.1 GHz to
6.0 GHz, silicon, single-pole, four-throw (SP4T) switch in a
leadless, surface-mount package. The switch is ideal for cellular
infrastructure applications, offers high isolation of 45 dB typical
at 2 GHz, and a low insertion loss of 0.6 dB at 2 GHz. It offers
excellent power handling capability up to 6.0 GHz, with input
power of 1 dB compression point (P1dB) of 35 dBm at 5 V
operation. The HMC7992 has good low frequency input power
handling below 0.1 GHz and can operate well down to 10 kHz,
with a typical 1 dB compression of 21 dBm (see Figure 21) and
an IIP3 of 37 dBm (see Figure 22) at 1 MHz.
The on-chip circuitry allows the HMC7992 to operate at a single,
positive supply voltage range from 3.3 V to 5 V, and as well as a
single, positive control voltage from 0 V to 1.8 V/3.3 V/5.0 V. A
2:4 decoder integrated in the switch requires only two controlled
input signals, with a positive control voltage range from 0 V to
1.8 V/3.3 V/5.0 V, to select one of the four radio frequency (RF)
paths.
