AUIRF2804S-7P
11 2015-11-11
† Highest passing voltage.
Qualification Level
Automotive
(per AEC-Q101)
Comments: This part number(s) passed Automotive qualification. IR’s Indus-
trial and Consumer qualification level is granted by extension of the higher
Automotive level.
D
2
PAK 7 Pin MSL1
ESD
Machine Model Class M4
†
(Per AEC-Q101-002)
Human Body Model Class H3A
†
(per AEC-Q101-001)
Charged Device Model Class C5
†
(per AEC-Q101-005)
RoHS Compliant
Yes
Qualification Information
Published by
Infineon Technologies AG
81726 München, Germany
© Infineon Technologies AG 2015
All Rights Reserved.
IMPORTANT NOTICE
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics
(“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated herein and/or any
information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and
liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third
party.
In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this
document and any applicable legal requirements, norms and standards concerning customer’s products and any use of
the product of Infineon Technologies in customer’s applications.
The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of
customer’s technical departments to evaluate the suitability of the product for the intended application and the
completeness of the product information given in this document with respect to such application.
For further information on the product, technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies office (www.infineon.com).
WARNINGS
Due to technical requirements products may contain dangerous substances. For information on the types in question
please contact your nearest Infineon Technologies office.
Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized
representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a
failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.
Revision History
Date Comments
11/11/2015
Updated datasheet with corporate template
Corrected ordering table on page 1.
