4©2015 Integrated Device Technology, Inc December 7, 2015
840004-11 Datasheet
AC Electrical Characteristics
Table 5. AC Characteristics, V
DD
= V
DDO
= 3.3V ± 5%, T
A
= 0°C to 70°C
NOTE: Electrical parameters are guaranteed over the specified ambient operating temperature range, which is established when the device is
mounted in a test socket with maintained transverse airflow greater than 500 lfpm. The device will meet specifications after thermal equilibrium
has been reached under these conditions.
NOTE 1: Defined as skew between outputs at the same supply voltage and with equal load conditions. Measured at V
DDO
/2.
NOTE 2: This parameter is defined in accordance with JEDEC Standard 65.
NOTE 3: Please refer to the Phase Noise Plots.
Symbol Parameter Test Conditions Minimum Typical Maximum Units
f
out
Output Frequency
F_SEL = 1 112 140 MHz
F_SEL = 0 56 70 MHz
tsk(o) Output Skew: NOTE 1, 2 80 ps
tjit(Ø)
RMS Phase Jitter (Random);
NOTE 3
125MHz, Integration Range:
1.875MHz – 20MHz
0.70 ps
62.5MHz, Integration Range:
1.875MHz – 20MHz
0.54 ps
t
R
/ t
F
Output Rise/Fall Time 20% to 80% 200 700 ps
odc Output Duty Cycle
F_SEL = 0 48 52 %
F_SEL = 1 46 54 %
