SpecNo.JEFK243A-0002G-01
P6/10
MURATA MFG.CO.,LTD
Reference Only
11.6 Marking for reel
Customer part number, MURATA part number, Inspection number(∗1), RoHS Marking(∗2), Quantity, etc
∗1) « Expression of Inspection No. » □□
OOOO ×××
(1) (2) (3)
(1)
Factory Code
(2) Date First digit : Year / Last digit of year
Second digit : Month / Jan. to Sep. → 1 to 9, Oct. to Dec. → O,N,D
Third, Fourth digit : Day
(3) Serial No.
∗2) « Expression of RoHS Marking » ROHS – Y
(△)
(1) (2)
(1)
RoHS regulation conformity parts.
(2) MURATA classification number
11.7 Marking for Outside package
Customer name Purchasing Order Number, Customer Part Number, MURATA part number,
RoHS Marking (∗2), Quantity, etc
11.8 Specification of Outer Case
Outer Case Dimensions
(mm)
Standard Reel Quantity in Outer Case
(Reel)
WDH
186 186 93 5
∗ Above Outer Case size is typical. It depends on a quantity of an
order.
12. △
!
Caution
12.1. Mounting Direction
Mount products in right direction.
Wrong direction which is 180 ° rotated from right direction cause serious trouble.
right direction wrong direction
12.2. Limitation of Applications
Please contact us before using our products for the applications listed below which require especially
high reliability for the prevention of defects which might directly cause damage to the third party's life, body
or property.
(1) Aircraft equipment (6) Transportation equipment (vehicles, trains, ships, etc.)
(2) Aerospace equipment (7) Traffic signal equipment
(3) Undersea equipment (8) Disaster prevention / crime prevention equipment
(4) Power plant control equipment (9) Data-processing equipment
(5) Medical equipment (10) Applications of similar complexity and / or reliability
requirements to the applications listed in the above.
13. Notice
Products can only be soldered with reflow.
This product is designed for solder mounting.
Please consult us in advance for applying other mounting method such as conductive adhesive.
13.1 NC (Non-Contact) Terminal
Don't connect NC terminal with any signal lines/GND lines on the circuit board, unless otherwise, it may affect on
the performance of this part.
Solder the NC terminal on soldering pad, which has no electrical connection with any other lines, to secure the
fixing strength of the part and to prevent displacement of the part during reflow soldering.
13.2 Flux and Solder
Flux
Use rosin-based flux, (with converting chlorine content 0.06 to 0.1(wt)%. ),
but not highly acidic flux
(with Halogen content exceeding 0.2(wt)% conversion to chlorine).
Do not use water-soluble flux.
Solde
Use Sn-3.0Ag-0.5Cu solde
Standard thickness of the solder paste should be 100 to 150µm.
W
D
Label
H
