16
FN3365.10
October 6, 2008
Absolute Maximum Ratings Thermal Information
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +7.0V
Input, Output or I/O Voltage . . . . . . . . . . . . GND -0.5V to V
CC
+0.5V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Operating Conditions
Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . +4.75V to +5.25V
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
Thermal Resistance (Typical, Note 1)
JA
(°C/W)
JC
(°C/W)
PLCC Package. . . . . . . . . . . . . . . . . . . 23.0 N/A
MQFP Package . . . . . . . . . . . . . . . . . . 35.0 N/A
Maximum Junction Temperature
PLCC and MQFP Packages . . . . . . . . . . . . . . . . . . . . . . . +150°C
Maximum Storage Temperature Range. . . . . . . . . .-65°C to +150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . .+300°C
Die Characteristics
Gate Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35469 Gates
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1.
JA
is measured with the component mounted on an evaluation PC board in free air.
DC Electrical Specifications V
CC
= 5.0V 5%, T
A
= 0° to +70°C
PARAMETER SYMBOL TEST CONDITIONS MIN MAX UNITS
Power Supply Current I
CCOP
V
CC
= Max, CLK Frequency 52MHz
INT/EXT
= ‘1’, Notes 2, 4
-468mA
V
CC
= Max, CLK Frequency 52MHz
INT/EXT
= ‘0’, Notes 3, 4
-572mA
Standby Power Supply Current I
CCSB
V
CC
= Max, Outputs Not Loaded - 500 A
Input Leakage Current I
I
V
CC
= Max, Input = 0V or V
CC
-10 10 A
Output Leakage Current I
O
V
CC
= Max, Input = 0V or V
CC
-10 10 A
Clock Input High V
IHC
V
CC
= Max 3.0 - V
Clock Input Low V
ILC
V
CC
= Min - 0.8 V
Logical One Input Voltage V
IH
V
CC
= Max 2.0 - V
Logical Zero Input Voltage V
IL
V
CC
= Min - 0.8 V
Logical One Output Voltage V
OH
I
OH
= -3mA, V
CC
= Min 2.6 - V
Logical Zero Output Voltage V
OL
I
OL
= 5mA, V
CC
= Min - 0.4 V
Input Capacitance C
IN
CLK Frequency 1MHz, All measurements
referenced to GND. T
A
= +25°C, Note 5
-12pF
Output Capacitance C
OUT
-12pF
NOTES:
2. Power supply current is proportional to frequency. Typical rating is 9mA/MHz when Internal Multiplexing is selected, INT/EXT = 1.
3. Power supply current is proportional to frequency. Typical rating is 11mA/MHz when External Multiplexing is selected, INT/EXT
= 0.
4. Output load per test circuit and C
L
= 40pF.
5. Not tested, but characterized at initial design and at major process/design changes.
6. Maximum junction temperature must be considered when operating part at high clock frequencies.
HSP43216
