74AUP1T45 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 9 August 2012 4 of 36
NXP Semiconductors
74AUP1T45
Low-power dual supply translating transceiver; 3-state
8. Limiting values
[1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] The values of V
CC(A)
and V
CC(B)
are provided in the recommended operating conditions; see Table 6.
[3] For SC-88 packages: above 87.5 C the value of P
tot
derates linearly with 4.0 mW/K.
For XSON6 packages: above 118 C the value of P
tot
derates linearly with 7.8 mW/K.
9. Recommended operating conditions
[1] V
CCO
is the supply voltage associated with the output port.
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
V
CC(A)
supply voltage A 0.5 +4.6 V
V
CC(B)
supply voltage B 0.5 +4.6 V
I
IK
input clamping current V
I
<0V 50 - mA
V
I
input voltage
[1]
0.5 +4.6 V
I
OK
output clamping current V
O
<0V 50 - mA
V
O
output voltage Active mode
A port
[1][2]
0.5 V
CC(A)
+0.5 V
B port
[1][2]
0.5 V
CC(B)
+0.5 V
suspend or 3-state mode
[1][2]
0.5 +4.6 V
I
O
output current V
O
=0VtoV
CC
- 20 mA
I
CC
supply current - 50 mA
I
GND
ground current 50 - mA
T
stg
storage temperature 65 +150 C
P
tot
total power dissipation T
amb
= 40 C to +125 C
[3]
-250mW
Table 6. Recommended operating conditions
Symbol Parameter Conditions Min Max Unit
V
CC(A)
supply voltage A 1.1 3.6 V
V
CC(B)
supply voltage B 1.1 3.6 V
V
I
input voltage 0 3.6 V
V
O
output voltage
[1]
0V
CCO
V
T
amb
ambient temperature 40 +125 C
t/V input transition rise and fall rate V
CCI
=1.1 V to 3.6 V 0 200 ns/V