AXL E EIP DI8 DO8 M12 6P
8425_en_03 PHOENIX CONTACT 13
10 Local status and diagnostic indicators
10.1 Indicators for Ethernet ports and power supply
Figure 9 Indicators for Ethernet ports and power supply
Designation Color Meaning State Description
LNK 1/2 Green Link Green
ON
Connection present at port 1/2.
OFF Connection not present at port 1/2.
ACT 1/2 Yellow Activity Yellow
ON
Data transmission present at port 1/2.
OFF Data transmission not present at port 1/2.
RDY Green/
yellow/
red
Ready Green
ON
Device is ready for operation.
Yellow
flashing
Firmware update is being performed.
Flashing
green/
yellow
Over- or undervoltage at U
S
Temperature of the device is in the critical area.
Failure of the actuator supply U
A
Surge voltage/undervoltage of the actuator supply U
A
And red US LED: sensor supply overload
Red ON Rotary encoding switches are set to an invalid/reserved position.
OFF Device is not ready for operation.
NET Green/
red
Network status Green
ON
At least one CIP connection is in place and the exclusive owner con-
nection has no timeout.
Green
flashing
An IP address is configured, no CIP connection is yet in place, and the
exclusive owner connection has no timeout.
Red ON Duplicate IP. ACD has determined an IP address conflict.
Red
flashing
Connection timeout. A timeout of an exclusive owner connection has
occurred.
Flashing
green/
red
Self test
OFF Device is not ready for operation.
