AXL E EIP DI8 DO8 M12 6P
8425_en_03 PHOENIX CONTACT 19
13.6 Discrete input point object (class code 08
hex
)
The Digital input point (DIP) object mirrors the digital inputs. This object can be used in simple toggle switches as well as in
complex I/O control modules. Each device has a separate instance for each digital input.
Class attributes
Instance attributes
Common services
13.7 Discrete output point object (class code 09
hex
)
The Digital output point (DOP) object is used to map digital outputs. You can use this object in simple applications (actuator)
or in complex applications (digital I/O control device). Each device has a separate instance for each digital output.
Class attributes
Instance attributes
Common services
Attribute Name Access Data type Value
1Version GetUINT2
Attribute Name Access Data type Value
3 Value Get BOOL 0 = off; 1 = on
4 Status Get BOOL 0 = OK; 1 = Fault
Service code Class Instance Service name
dec hex
14 0E Yes Yes Get_Attribute_Single
16 10 No Yes Set_Attribute_Single
Attribute Name Access Data type Value
1Version GetUINT1
Attribute Name Access Data type Value
3 Value Get, Set BOOL 0 = off; 1 = on
4 Status Get BOOL 0 = OK; 1 = Fault
Service code Class Instance Service name
dec hex
14 0E Yes Yes Get_Attribute_Single
16 10 No Yes Set_Attribute_Single
AXL E EIP DI8 DO8 M12 6P
8425_en_03 PHOENIX CONTACT 20
13.8 Device level ring object (class code 47
hex
)
Class attributes
Instance attributes
Common services
Attribute Name Access Data type Value
1Version GetUINT2
Attribute Name Access Datentyp Wert/ Beschreibung
1 Network topology Get USINT 0 = Linear
1 = Ring
2 Network status Get USINT 0 = Normal
1 = Ring fault
2 = Unexpected loop detected
3 = Partial network fault
4 = Rapid fault/Restore cycle
10 Active supervisor
address
Get STRUCT of: IP and/or MAC adress of the active ring supervisor
UDINT Supervisor IP address
ARRAY of 6
USINTs
Supervisor MAC adress
12 Capability flags Get DWORD Bit 0 Announced-based ring node
Bit 1 Beacon-based ring note
Bit 2 ... Bit 4 Reserved
Bit 5 Supervisor capable
Bit 6 ... Bit 31 Reserved
Service code Class Instance Service name
dec hex
1 01 Yes Yes Get_Attribute_Single
14 0E Yes Yes Get_Attribute_Single
AXL E EIP DI8 DO8 M12 6P
8425_en_03 PHOENIX CONTACT 21
13.9 Quality of service object (class code 48
hex
)
Quality of service (QoS) affects the forwarding and handling of data streams and results in individual data streams being
given differential treatment (usually preferential). QoS can be used, e.g., to guarantee a transmission bandwidth for individual
data streams. The device uses QoS in connection with prioritization.
Class attributes
Instance attributes
Common services
Attribute Name Access Data type Value
1Version GetUINT1
2Max instance GetUINT1
Attribute Name Access Data type Value/Description
1 802.1Q tag enable Get, Set UINT 0 = off (default); 1 = on
4 DSCP urgent Get, Set USINT DSCP value for CIP transport class 0/1 Urgent priority message
(default 55)
5 DSCP scheduled Get, Set USINT DSCP value for CIP transport class 0/1 Scheduled priority mes-
sage (default 47)
6 DSCP high Get, Set USINT DSCP value for CIP transport class 0/1 High priority message
(default 43)
7 DSCP low Get, Set USINT DSCP value for CIP transport class 0/1 Low priority message (
default 31)
8 DSCP explicit Get, Set USINT DSCP value for CIP explicit messages (transport class 2/3 and
UCMM) and all other EtherNet/IP encapsulation messages
(default 27)
Service code Class Instance Service name
dec hex
14 0E Yes Yes Get_Attribute_Single
16 10 No Yes Set_Attribute_Single

2701492

Mfr. #:
Manufacturer:
Phoenix Contact
Description:
Terminal Block Interface Modules AXL E EIP DI8 DO8 M12 6P
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet