TJA1080A All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 6 — 28 November 2012 35 of 49
NXP Semiconductors
TJA1080A
FlexRay transceiver
WAKE symbol detection
t
det(wake)DATA_0
DATA_0 wake-up detection time Standby, Sleep, Star-standby or
Star-sleep modes
10 V V
BP
+15 V
10 V V
BM
+15 V
1- 4 s
t
det(wake)idle
idle wake-up detection time 1 - 4 s
t
det(wake)tot
total wake-up detection time 50 - 115 s
Undervoltage
t
det(uv)(VCC)
undervoltage detection time on
pin V
CC
100 - 670 ms
t
rec(uv)(VCC)
undervoltage recovery time on
pin V
CC
1- 5.2ms
t
det(uv)(VIO)
undervoltage detection time on
pin V
IO
100 - 670 ms
t
to(uv)(VCC)
undervoltage time-out time on
pin V
CC
for entering Standby
mode
star configuration; wake flag is
set
432 - 900 s
t
det(uv)(VBAT)
undervoltage detection time on
pin V
BAT
--1 ms
Activity detection
t
det(act)(TXEN)
activity detection time on pin
TXEN
star configuration 100 - 200 ns
t
det(act)(TRXD)
activity detection time on pin
TRXD
star configuration 100 - 200 ns
t
det(act)(bus)
activity detection time on bus
pins
V
dif
: 0 mV 400 mV 100 - 250 ns
t
det(idle)(TXEN)
idle detection time on pin TXEN star configuration 100 - 200 ns
t
det(idle)(TRXD)
idle detection time on pin TRXD star configuration 50 - 100 ns
t
det(idle)(bus)
idle detection time on bus pins V
dif
: 400 mV 0 mV 100 - 250 ns
Star modes
t
to(idle-sleep)
idle to sleep time-out time 640 - 2660 ms
t
to(tx-locked)
transmit to locked time-out time 2600 - 10400 s
t
to(rx-locked)
receive to locked time-out time 2600 - 10400 s
t
to(locked-sleep)
locked to sleep time-out time 64 - 333 ms
t
to(locked-idle)
locked to idle time-out time 1.4 - 5.1 s
Node modes
t
d(STBN-RXD)
STBN to RXD delay time STBN HIGH to RXD HIGH; wake
flag set
--2 s
t
d(STBN-INH2)
STBN to INH2 delay time STBN LOW to INH2 floating;
Normal mode
--12s
t
h(gotosleep)
go-to-sleep hold time 20 35 50 s
Status register
t
det(EN)
detection time on pin EN for mode control 20 - 80 s
T
EN
time period on pin EN for reading status bits 4 - 20 s
Table 14. Dynamic characteristics
…continued
All parameters are guaranteed for V
BAT
= 6.5 V to 60 V; V
CC
= 4.75 V to 5.25 V; V
BUF
= 4.75 V to 5.25 V; V
IO
= 2.2 V to 5.25 V;
T
vj
=
40
C to +150
C; R
bus
= 45
; R
TRXD
= 200
unless otherwise specified. All voltages are defined with respect to
ground; positive currents flow into the IC.
Symbol Parameter Conditions Min Typ Max Unit