STPS30L45CG-TR

Package Information STPS30L45C
10/12 Doc ID 8002 Rev 4
Table 9. TO-247 dimensions
Ref.
Dimensions
Millimeters Inches
Min. Max. Min. Max.
A 4.85 5.15 0.191 0.203
A1 2.20 2.60 0.086 0.102
b 1.00 1.40 0.039 0.055
b1 2.00 2.40 0.078 0.094
b2 3.00 3.40 0.118 0.133
c 0.40 0.80 0.015 0.031
D
(1)
1. Dimension D plus gate protrusion does not exceed 20.5 mm
19.85 20.15 0.781 0.793
E 15.45 15.75 0.608 0.620
e 5.45 typ. 0.215 typ.
L 14.20 14.80 0.559 0.582
L1 3.70 4.30 0.145 0.169
L2 18.50 typ. 0.728 typ.
P
(2)
2. Resin thickness around the mounting hole is not less than 0.9 mm
3.55 3.65 0.139 0.143
R 4.50 5.50 0.177 0.217
S 5.50 typ. 0.216 typ.
E
L2
S
D
c
A1
BACK VIEW
Heat-sink plane
L1
L
b1
b2
b
A
e
1
1
2
2
3
3
R
P
STPS30L45C Ordering Information
Doc ID 8002 Rev 4 11/12
3 Ordering Information
4 Revision history
Table 10. Ordering information
Order code Marking Package Weight Base qty Delivery mode
STPS30L45CT STPS30L45CT TO-220AB 2g 50 Tube
STPS30L45CG STPS30L45CG D
2
PA K 1.8g 50 Tube
STPS30L45CG-TR STPS30L45CG D
2
PA K 1.8g 500 Tape and reel
STPS30L45CW STPS30L45CW TO-247 4.4g 30 Tube
STPS30L45CR STPS30L45CR I
2
PA K 1.4g 50 Tube
STPS30L45CFP STPS30L45CFP TO-220FPAB 1.9 g 50 Tube
Table 11. Document revision history
Date Revision Changes
Jul-2003 3B Previous issue
13-Oct-2010 4
Added paragraph above Ta b l e 6 and updated I
2
PAK dimensions in
Ta b l e 6 . Updated TO-247 dimensions in Ta b l e 9 .
STPS30L45C
12/12 Doc ID 8002 Rev 4
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com

STPS30L45CG-TR

Mfr. #:
Manufacturer:
STMicroelectronics
Description:
Schottky Diodes & Rectifiers 2X15 Amp 45 Volt
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union