OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SE2614BT-R

P1-P3P4-P6P7-P9P10-P11
DATA SHEET
SE2614BT: 2.4 GHz High Efficiency Wireless LAN Front-End
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202394B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 9, 2014 1
Applications
IEEE802.11b DSSS WLAN
IEEE802.11g,n OFDM WLAN
Access Points, PCMCIA, PC cards
Features
Dual Mode IEEE802.11b, IEEE802.11g,
IEEE802.11n
Integrated PA, TX Filter, SP3T switch
Integrated Positive Slope Power Detector
20 dBm Output Power, 802.11b, 11 Mbps
18 dBm @ 3.0 % EVM, 802.11g, 3.3V
Lead free, halogen free and RoHS compliant
Small plated package, 3 mm x 3 mm x 0.6 mm,
MSL 1
Ordering Information
Part No. Package Remark
SE2614BT 20 lead QFN Samples
SE2614BT-R 20 lead QFN Tape & Reel
SE2614BT-EK1 N/A Evaluation kit
Product Description
The SE2614BT is a complete 802.11bgn WLAN RF
front-end module providing all the functionality of the
power amplifier, power detector, SP3T Switch and 50
ohm matching on all RF ports in an ultra compact
form factor.
The SE2614BT is designed for ease of use, with all
the critical matching and harmonic filtering integrated.
The SE2614BT also includes a transmitter power
detector with 20 dB of dynamic range and a digital
enable control for transmitter power on/off control.
The power ramp rise/fall time is 0.1 s typical.
Functional Block Diagram
Figure 1: Functional Block Diagram
DATA SHEET
SE2614BT: 2.4 GHz High Efficiency Wireless LAN Front-End
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202394B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 9, 2014 2
Pin Out Diagram
Figure 2: SE2614BT Pin Out (Top View Through Package)
Pin Out Description
Pin Name Description Pin Name Description
1 DET Power Detector output 11 CPORT2 Switch Control Logic – Port 2 path
2 EN TX Enable 12 CPORT1 Switch Control Logic – Port 1 path
3 VCC0 Supply Voltage – Pre-driver & Driver 13 GND Ground
4 TXIN TX input 14 ANT Antenna Output
5 GND Ground 15 GND Ground
6 GND Ground 16 GND Ground
7 PORT1 Port 1 – May be used for RX or BT 17 GND Ground
8 GND Ground 18 Vcc3 Supply Voltage Power Stage
9 PORT2 Port 2 – May be used for RX or BT 19 GND Ground
10 CTX Switch Control Logic – TX path 20 Vcc2 Supply Voltage
DATA SHEET
SE2614BT: 2.4 GHz High Efficiency Wireless LAN Front-End
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202394B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 9, 2014 3
Absolute Maximum Ratings
These are stress ratings only. Exposure to stresses beyond these maximum ratings may cause permanent damage
to, or affect the reliability of the device. Avoid operating the device outside the recommended operating conditions
defined below. This device is ESD sensitive. Handling and assembly of this device should be at ESD protected
workstations.
Symbol Definition Min. Max. Unit
VCC Supply Voltage on VCC -0.3 3.6 V
VIN DC input on EN, CTX, CPORT1, CPORT2 -0.3 3.6 V
TX RF Input Power. - 12.0 dBm
TA Operating Temperature Range -40 85 °C
TSTG Storage Temperature Range -40 150 °C
ESD
HBM
JEDEC JESD22-A114 all pins to Ground - 1 KV
Recommended Operating Conditions
Symbol Parameter Min. Typ. Max. Unit
TA Ambient temperature -40 25 85 °C
VCC VCC0, VCC2, VCC3, supply voltage 3.0 3.3 3.6 V
DC Electrical Characteristics
Conditions: VCC = EN = 3.3 V, TA = 25 C, as measured on Skyworks Solutions’ SE2614BT-EK1 evaluation board,
all unused ports terminated with 50 ohms, unless otherwise noted
Symbol Parameter Conditions Min. Typ. Max. Unit
ICC-G Total Supply Current
POUT = 18 dBm, 54 Mbps
OFDM signal, 64QAM
- 160 - mA
ICC-B Total Supply Current
P
OUT
= 20 dBm, 11 Mbps
CCK signal, BT = 0.45
- 190 - mA
ICQ Total Supply Current No RF - 90 - mA
Icntl Control Line Current
CTX, CPORT2, CPORT1 =
3.3V
1 10 A
ICC_OFF Total Supply Current
No RF Applied, EN = CTX =
CPORT1 = CPORT2 = 0 V
- 1 10 A
P1-P3P4-P6P7-P9P10-P11

SE2614BT-R

Mfr. #:
Buy SE2614BT-R
Manufacturer:
Skyworks Solutions, Inc.
Description:
RF Front End 2.4GHz 802.11bgn 3.3Volt -40C +85C
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet